Aug-2023 Free NSE7_EFW-7.0 Test Questions Real Practice Test Questions [Q69-Q88]

Rate this post

Aug-2023 Free NSE7_EFW-7.0 Test Questions Real Practice Test Questions

NSE7_EFW-7.0 Dumps Updated Aug 02, 2023 WIith 165 Questions

Fortinet NSE7_EFW-7.0 exam is a certification offered by Fortinet, a leading provider of network security solutions. NSE7_EFW-7.0 exam is designed to test the knowledge and skills of network security professionals in deploying and managing Fortinet’s enterprise firewall solutions. Fortinet NSE 7 – Enterprise Firewall 7.0 certification is intended for network security professionals who have a good understanding of networking and security concepts and are looking to enhance their skills and expertise in Fortinet’s firewall technology.

Fortinet NSE7_EFW-7.0 Exam, also known as the Fortinet NSE 7 – Enterprise Firewall 7.0 Exam, is a certification exam that tests the skills and knowledge of IT professionals in designing, implementing, and managing enterprise-level firewall solutions using Fortinet technology. NSE7_EFW-7.0 exam is ideal for network administrators, security professionals, and other IT experts who work with Fortinet firewalls in a corporate environment.

NO.69 What events are recorded in the crashlogs of a FortiGate device? (Choose two.)

A process crash.

Configuration changes.

Changes in the status of any of the FortiGuard licenses.

System entering to and leaving from the proxy conserve mode.

NO.70 View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.

Which statements are correct regarding the output shown? (Choose two.)

There are 0 ephemeral sessions.

All the sessions in the session table are TCP sessions.

No sessions have been deleted because of memory pages exhaustion.

There are 166 TCP sessions waiting to complete the three-way handshake.

NO.71 What is the diagnose test application ipsmenitor 5 command used for?

To enable IPS bypass mode

To disable the IPS engine

To restart all IPS engines and monitors

To provide information regarding IPS sessions

NO.72 Four FortiGate devices configured for OSPF connected to the same broadcast domain. The first unit is elected as the designated router. The second unit is elected as the backup designated router.
Under normal operation, how many OSPF full adjacencies are formed to each of the other two units?

NO.73 Refer to the exhibit, which shows a central management configuration.

Which server will FortiGate choose for web filter rating requests, if 10.0.1.240 is experiencing an outage?

Public FortiGuard servers

10.0.1.243

10.0.1.242

10.0.1.244

NO.74 An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration.
The administrator has also enabled the IKE real time debug:
diagnose debug application ike-1
diagnose debug enable
In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?

Phase1; IKE mode configuration; XAuth; phase 2.

Phase1; XAuth; IKE mode configuration; phase2.

Phase1; XAuth; phase 2; IKE mode configuration.

Phase1; IKE mode configuration; phase 2; XAuth.

NO.75 Exhibits:

Refer to the exhibits, which contain the network topology and BGP configuration for a hub.
An administrator is trying to configure ADVPN with a hub-spoke VPN setup using iBGP. All the VPNs are up and connected to the hub. The hub is receiving route information from both spokes over iBGP; however, the spokes are not receiving route information from each other.
What change must the administrator make to the hub BGP configuration so that the routes learned by one spoke are forwarded to the other spokes?

Configure an individual neighbor and remove neighbor-range configuration.

Configure the hub as a route reflector client.

Change the router id to 10.1.0.254.

Make the configuration of remote-as different from the configuration of local-as.

NO.76 You have configured FortiManager as a local FDS to provide FortiGate AV and IPS updates, but FortiGate devices are not receiving updates to their AV signature databases, IPS engines, or IPS signature databases.
Which two settings need to be verified for these features to function? (Choose two.)

FortiGate needs to have the server list entry for FortiManager set to server-type update under config system central-management.

FortiManager needs to be the license validation server for FortiGate devices trying to retrieve updated AV and IPS packages.

Service access needs to be enabled on FortiManager under System Settings > Network.

FortiGate needs to have include-default-servers disabled under config system central-management.

NO.77 View the exhibit, which contains the output of get sys ha status, and then answer the question below.

Which statements are correct regarding the output? (Choose two.)

The slave configuration is not synchronized with the master.

The HA management IP is 169.254.0.2.

Master is selected because it is the only device in the cluster.

port 7 is used the HA heartbeat on all devices in the cluster.

NO.78 View the exhibit, which contains the output of diagnose sys session list, and then answer the question below.

If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?

This session is for HA heartbeat traffic.

This session is synced with the slave unit.

The inspection of this session has been offloaded to the slave unit.

This session cannot be synced with the slave unit.

NO.79 View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.

Which statements are correct regarding the output shown? (Choose two.)

There are 0 ephemeral sessions.

All the sessions in the session table are TCP sessions.

No sessions have been deleted because of memory pages exhaustion.

There are 166 TCP sessions waiting to complete the three-way handshake.

NO.80 Refer to the exhibit, which shows the output of a diagnose command

What can you conclude from the RTT value?

Its value represents the time it takes to receive a response after a rating request is sent to a particular server.

Its value is incremented with each packet lost.

It determines which FortiGuard server is used for license validation.

Its initial value is statically set to 10.

NO.81 What is the purpose of an internal segmentation firewall (ISFW)?

It inspects incoming traffic to protect services in the corporate DMZ.

It is the first line of defense at the network perimeter.

It splits the network into multiple security segments to minimize the impact of breaches. D . It is an all-in-one security appliance that is placed at remote sites to extend the enterprise network.

NO.82 Refer to the exhibit, which contains partial outputs from two routing debug commands.

Why is the port2 default route not in the second command’s output?

It has a higher priority value than the default route using port1.

It is disabled in the FortiGate configuration.

It has a lower priority value than the default route using port1.

It has a higher distance than the default route using port1.

NO.83 Examine the following partial output from two system debug commands; then answer the question below.

Which of the following statements are true regarding the above outputs? (Choose two.)

The unit is running a 32-bit FortiOS

The unit is in kernel conserve mode

The Cached value is always the Active value plus the Inactive value

Kernel indirectly accesses the low memory (LowTotal) through memory paging

NO.84 View the global IPS configuration, and then answer the question below.

Which of the following statements is true regarding this configuration?

IPS will scan every byte in every session.

FortiGate will spawn IPS engine instances based on the system load.

New packets will be passed through without inspection if the IPS socket buffer runs out of memory.

IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory.

NO.85 An administrator has been assigned the task of creating a set of firewall policies which must be evaluated before any custom policies defined within the policy packages of managed FortiGate devices, across all 25 ADOMSs in FortiManager.
How should the administrator accomplish this task?

Create a footer policy in the Global ADOM containing the firewall policies that must be evaluated first, and then assign this footer policy to all other ADOMs.

Create a header policy in the Global ADOM containing the firewall policies that must be evaluated first, and then assign this header policy to all other ADOMs.

Move the FortiGate devices into a single globally scoped ADOM, and merge policy packages, inserting the new firewall policies at the top.

Use a CLI script from the root ADOM on FortiManager to push these new policies to all FortiGate devices, through the FGFM tunnel.

NO.86 Refer to the exhibit, which shows the output of a debug command.

Which two statements about the output are true? (Choose two.)

In the network connected to port 4, two OSPF routers are down.

Based on the network type of port 4, OSPF hello packets will be sent to 224.0.0.5.

Based on the network type of port 4, OSPF hello packets will be sent to 224.0.0.6.

There are a total of 5 OSPF routers attached to the Port4 network segment.

NO.87 Refer to the exhibit, which shows the output of a diagnose command.

What can you conclude from the output shown in the exhibit? (Choose two.)

This is a pinhole session created to allow traffic for a protocol that requires additional sessions to operate through FortiGate.

This is an expected session created by the IPS engine.

Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.200.1.1.

Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.0.1.10.

NO.88 View the exhibit, which contains an entry in the session table, and then answer the question below.

Which one of the following statements is true regarding FortiGate’s inspection of this session?