Get Instant Access of 100% REAL 2V0-41.20 DUMP Pass Your Exam Easily [Q48-Q64]

Rate this post

Get Instant Access of 100% REAL 2V0-41.20 DUMP Pass Your Exam Easily

2V0-41.20 Free Exam Questions with Quality Guaranteed

NEW QUESTION 48
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

Create a secondary vNIC on each quest VM for SVM communication.

Place a partner SVM on each compute cluster node.

Centralize partner SVMs in a service cluster.

Add partner SVMs to an edge cluster.

“For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster.”

NEW QUESTION 49
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host’s physical adapter?

Switch Visualization

Port Mirroring

Activity Monitoring

IPFIX

NEW QUESTION 50
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

Multicast routing is implemented with PIM Sparse-Mode.

IGMP Snooping is used to populate multicast forwarding tables.

Tier-0 gateways can be the Rendezvous Point.

Multicast is supported in ESXi and KVM transport nodes.

An Edge can be the Rendezvous Point.

NEW QUESTION 51
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

Advertise All LB SNAT IP Routes

All Static Routes

Information

Advertise All LB VIP Routes

Advertise All NAT Routes

NEW QUESTION 52
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?

Wireshark

pktcap-uw

net-stats

tcpdump

NEW QUESTION 53
Which three can an administrator define in a transport node profile? (Choose three.)

Logical Router

Segment Profile

Segment

Uplink Profile

VDS switch configuration

N-VDS switch configuration

NEW QUESTION 54
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?

Service interface

Loopback Router Port

Downlink interface

VLAN Uplink

“The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink”

NEW QUESTION 55
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

Create a secondary vNIC on each quest VM for SVM communication.

Place a partner SVM on each compute cluster node.

Centralize partner SVMs in a service cluster.

Add partner SVMs to an edge cluster.
“For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster.”

NEW QUESTION 56
What are two supported N-VDS modes? (Choose two.)

DPDK Datapath

Overlay Datapath

Secure Datapath

Enhanced Datapath

Standard Datapath

Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html

NEW QUESTION 57
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)

policy-based IPSec VPN

Layer-7 based IPSec VPN

route-based IPSec VPN

Open source based IPSec VPN

SSL based IPSec VPN

NEW QUESTION 58
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

Automatically created when Tier-1 is created.

Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.

Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.

Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html

NEW QUESTION 59
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)

Deploy Large size Edge node/s.

Configure ECMP on the Tier-0 gateway.

Configure NAT on the Tier-0 gateway.

Add an additional vNIC to the NSX Edge node.

Configure a Tier-1 gateway and connect it directly to the physical routers.

NEW QUESTION 60
An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.
What are two possible causes for this issue? (Choose two.)

The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.

Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.

The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.

The virtual machines running on the KVM Transport Node are not connected to the VDS.

The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.

NEW QUESTION 61
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?

Beacon Probing (BP)

Host Standby Router Protocol (HSRP)

Bidirectional Forwarding Detection (BFD)

Virtual Router Redundancy Protocol (VRRP)

NEW QUESTION 62
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

SNAT

Reverse NAT

DNAT

1:1 NAT

NEW QUESTION 63
What is the most restrictive NSX-T built-in role which will allow a user to apply configuration changes on a NSX Edge?

Cloud Service Administrator

Network Engineer

Network Operator

NSX Administrator

NEW QUESTION 64
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?

N-VDS/VDS Profile

Transport Node Profile

Host Switch Profile

Uplink Profile

Loading …

VMware 2V0-41.20 exam is a certification test designed to validate the candidate’s knowledge and skills in VMware NSX-T Data Center. Passing 2V0-41.20 exam will grant the candidate with the VMware Certified Professional – Network Virtualization 2021 (VCP-NV 2021) certification. Candidates can prepare for 2V0-41.20 exam by enrolling in VMware’s official training courses or studying independently using study guides and practice exams. 2V0-41.20 exam is a computer-based test that consists of 70 multiple-choice questions and is available in several languages.

2V0-41.20 Free Exam Files Downloaded Instantly: https://www.prepawayexam.com/VMware/braindumps.2V0-41.20.ete.file.html