Updated Jan-2024 Exam HPE6-A75 Dumps – Pass Your Certification Exam [Q20-Q40]

4/5 - (1 vote)

Updated Jan-2024 Exam HPE6-A75 Dumps – Pass Your Certification Exam

Latest Real HP HPE6-A75 Exam Dumps Questions

Q20. A company has a mixed wireless and wired Aruba solution. It wants to encrypt messages used to send configurations and other important messages to the APs carried outside the GRE tunnels.
What can the company do to meet these goals?

Deploy Aruba Meridian and integrate the AOS-Switches with it.

Configure extended IP ACLs on the AOS-Switches to filter the traffic.

Use PAPI enhanced security.

Use tunneled node to send traffic through an Aruba Mobility Controller.

Q21. A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2. What is the difference?

A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.

A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.

A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.

A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

Q22. An AOS-Switch needs to implement tunneled node in role-based mode. Aruba ClearPass is configured to assign users for which the traffic should be tunneled to a role named tunnel. The Aruba Mobility Controller should apply policies associated with the employees group to these users.
What is the correct user role configuration on the AOS-Switch for this scenario?

two user roles, one named tunnel that uses the tunneled-node-redirect command, and one named employees

two user roles, one named employees that uses the tunneled-node-redirect command, and one named tunnel

one user role named tunnel with employees set as the secondary role in the tunneled-node- command redirect

one user role named employees with tunnel set as the secondary role in the tunneled-node- command redirect

Q23. A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?

The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.

The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.

The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.

The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.

Q24. An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1

if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1

if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value

Q25. Refer to the exhibit. Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at
10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

Q26. Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

The metric on the VLAN 1000 interface is too low.

Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

OSPF routing switches choose the best intra-area routes based on Area 1 links only.

The link between Switch-1 and Switch-2 has gone down.

Q27. Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

VRRP

SNMP

PAPI

IPSec

Q28. When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

When we have to assign a vlan to a wired user on a third party wired switch that doesn’t support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn’t support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

Q29. What must an OSPF router do when it receives a link state update?

It must participate in a new election for the Designated Router and Backup DR.

It must initiate a graceful restart timer.

It must re-establish adjacency with its Designated Router and Backup DR.

It must run the shortest path first algorithm.

Q30. A network administrator configures V5F settings on two Aruba 2930F switches. The switches form two separate VSF fabrics. What should the administrator check?

that the domain ID matches on both switches

that each switch is assigned a unique VSF priority

that the switch with the lower priority has the lower member ID

that LLDP MAD is configured on both members

Q31. Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

Q32. Which statement is true about the Endpoint Profiler? (Select two.)

The Endpoint Profiler uses DHCP fingerprinting for device categorization.

Data obtained from the Endpoint Profiler can be used in Enforcement Policy.

Endpoint Profiler requires a profiling license.

The Endpoint Profiler requires the Onboard license to be enabled.

The Endpoint Profiler can only categorize laptops and desktops.

Q33. Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

Q34. Refer to the exhibit.

Based on the configuration for the client’s certificate private key as shown, which statements accurately describe the settings? (Select two.)

More bits in the private key will increase security.

The private key for TLS client certificates is not created.

The private key is stored in the ClearPass server.

More bits in the private key will reduce security.

The private key is stored in the user device.

Q35. Which statement is true about the databases in ClearPass?

Entries in the guest user database do not expire.

A Static host list can only contain a list of IP addresses.

Entries in the guest user database can be deleted.

Entries in the local user database cannot be modified.

The endpoints database can only be populated by manually adding MAC addresses to the table.

Q36. What is a primary use case for RPVST+ on AOS-Switches?

more granular load balancing than MSTP when access switches connect to two core switches

enhanced loop protection in an MSTP network

integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol

seamless integration with RSTP

Q37. An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)

GRE

SSL

PAPI

IPSec

Q38. What are Operator Profiles used for?

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest

Q39. The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

Q40. Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?