NO.16 Create a playbook called webdev.yml in ‘home/sandy/ansible. The playbook will create a directory Avcbdev on dev host. The permission of the directory are 2755 and owner is webdev. Create a symbolic link from /Webdev to /var/www/html/webdev. Serve a file from Avebdev7index.html which displays the text “Development” Curl http://node1.example.com/webdev/index.html to test

NO.17 Create an empty encrypted file called myvault.yml in /home/sandy/ansible and set the password to notsafepw. Rekey the password to iwejfj2221.

NO.18 Create an Ansible vault to store user passwords as follows:
* The name of the vault is valut.yml
* The vault contains two variables as follows:
– dev_pass with value wakennym
– mgr_pass with value rocky
* The password to encrypt and decrypt the vault is atenorth
* The password is stored in the file /home/admin/ansible/password.txt

NO.19 Create Logical volumes with lvm.yml in all nodes according to following
requirements.
—————————————————————————————-
* Create a new Logical volume named as ‘data’
* LV should be the member of ‘research’ Volume Group
* LV size should be 1500M
* It should be formatted with ext4 file-system.
–> If Volume Group does not exist then it should print the message “VG Not found”
–> If the VG can not accommodate 1500M size then it should print “LV Can not be
created with
following size”, then the LV should be created with 800M of size.
–> Do not perform any mounting for this LV.

NO.20 Create a role called sample-apache in /home/sandy/ansible/roles that enables and starts httpd, enables and starts the firewall and allows the webserver service. Create a template called index.html.j2 which creates and serves a message from /var/www/html/index.html Whenever the content of the file changes, restart the webserver service.
Welcome to [FQDN] on [IP]
Replace the FQDN with the fully qualified domain name and IP with the ip address of the node using ansible facts. Lastly, create a playbook in /home/sandy/ansible/ called apache.yml and use the role to serve the index file on webserver hosts.

NO.21 Create a playbook called packages.yml that:
———————————————-
–> Installs the php and mariadb packages on hosts in the dev, test, and prod host
groups.
–> Installs the Development Tools package group on hosts in the dev host group.
–> Updates all packages to the latest version on hosts in the dev host group.

NO.22 Create a file called adhoc.sh in /home/sandy/ansible which will use adhoc commands to set up a new repository. The name of the repo will be ‘EPEL’ the description ‘RHEL8’ the baseurl is ‘https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rmp’ there is no gpgcheck, but you should enable the repo.
* You should be able to use an bash script using adhoc commands to enable repos. Depending on your lab setup, you may need to make this repo “state=absent” after you pass this task.

NO.23 Create a playbook called webdev.yml in ‘home/sandy/ansible. The playbook will create a directory Avcbdev on dev host. The permission of the directory are 2755 and owner is webdev. Create a symbolic link from /Webdev to /var/www/html/webdev. Serve a file from Avebdev7index.html which displays the text “Development” Curl http://node1.example.com/webdev/index.html to test

NO.24 In /home/sandy/ansible/ create a playbook called logvol.yml. In the play create a logical volume called Iv0 and make it of size 1500MiB on volume group vgO If there is not enough space in the volume group print a message “Not enough space for logical volume” and then make a 800MiB Iv0 instead. If the volume group still doesn’t exist, create a message “Volume group doesn’t exist” Create an xfs filesystem on all Iv0 logical volumes. Don’t mount the logical volume.

NO.25 Create a file in /home/sandy/ansible/ called report.yml. Using this playbook, get a file called report.txt (make it look exactly as below). Copy this file over to all remote hosts at /root/report.txt. Then edit the lines in the file to provide the real information of the hosts. If a disk does not exist then write NONE.

NO.26 Create the users in the file usersjist.yml file provided. Do this in a playbook called users.yml located at /home/sandy/ansible. The passwords for these users should be set using the lock.yml file from TASK7. When running the playbook, the lock.yml file should be unlocked with secret.txt file from TASK 7.
All users with the job of ‘developer’ should be created on the dev hosts, add them to the group devops, their password should be set using the pw_dev variable. Likewise create users with the job of ‘manager’ on the proxy host and add the users to the group ‘managers’, their password should be set using the pw_mgr variable.

NO.27 Create a file called requirements.yml in /home/sandy/ansible/roles to install two roles. The source for the first role is geerlingguy.haproxy and geerlingguy.php. Name the first haproxy-role and the second php-role. The roles should be installed in /home/sandy/ansible/roles.

NO.28 Create a playbook called issue.yml in /home/sandy/ansible which changes the file /etc/issue on all managed nodes: If host is a member of (lev then write “Development” If host is a member of test then write “Test” If host is a member of prod then write “Production”

NO.29 Create a file called adhoc.sh in /home/sandy/ansible which will use adhoc commands to set up a new repository.
The name of the repo will be ‘EPEL’ the description ‘RHEL8’ the baseurl is ‘https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rmp’ there is no gpgcheck, but you should enable the repo.
* You should be able to use an bash script using adhoc commands to enable repos.
Depending on your lab setup, you may need to make this repo “state=absent” after you pass this task.

NO.30 Create a playbook called issue.yml in /home/sandy/ansible which changes the file /etc/issue on all managed nodes: If host is a member of (lev then write “Development” If host is a member of test then write “Test” If host is a member of prod then write “Production”

NO.31 Create a file called requirements.yml in /home/sandy/ansible/roles to install two roles. The source for the first role is geerlingguy.haproxy and geerlingguy.php. Name the first haproxy-role and the second php-role. The roles should be installed in /home/sandy/ansible/roles.

NO.32 Create a role called apache in “/home/admin/ansible/roles” with the following
requirements:
–> The httpd package is installed, enabled on boot, and started.
–> The firewall is enabled and running with a rule to allow access to the web server.
–> template file index.html.j2 is used to create the file /var/www/html/index.html
with the output:
Welcome to HOSTNAME on IPADDRESS
–> Where HOSTNAME is the fqdn of the managed node and IPADDRESS is the IP-Address of
the managed node.
note: you have to create index.html.j2 file.
–> Create a playbook called httpd.yml that uses this role and the playbook runs on
hosts in the webservers host group.

NO.33 Generate a hosts file:
* Download an initial template file hosts.j2 from http://classroom.example.com/
hosts.j2 to
/home/admin/ansible/ Complete the template so that it can be used to generate a file with a line for each inventory host in the same format as /etc/hosts:
172.25.250.9 workstation.lab.example.com workstation
* Create a playbook called gen_hosts.yml that uses this template to generate the file /etc/myhosts on hosts in the dev host group.
* When completed, the file /etc/myhosts on hosts in the dev host group should have a line for each managed host:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
172.25.250.10 serevra.lab.example.com servera
172.25.250.11 serevrb.lab.example.com serverb
172.25.250.12 serevrc.lab.example.com serverc
172.25.250.13 serevrd.lab.example.com serverd
—————————————————————–
while practising you to create these file hear. But in exam have to download as per questation.
hosts.j2 file consists.
localhost localhost.localdomain localhost4 localhost4.localdomain4
::1
localhost localhost.localdomain localhost6 localhost6.localdomain6
——————————————————————-

NO.34 Create an empty encrypted file called myvault.yml in /home/sandy/ansible and set the password to notsafepw. Rekey the password to iwejfj2331.

NO.35 Install and configure ansible
User sandy has been created on your control node with the appropriate permissions already, do not change or modify ssh keys. Install the necessary packages to run ansible on the control node. Configure ansible.cfg to be in folder /home/sandy/ansible/ansible.cfg and configure to access remote machines via the sandy user. All roles should be in the path /home/sandy/ansible/roles. The inventory path should be in /home/sandy/ansible/invenlory.
You will have access to 5 nodes.
node1.example.com
node2.example.com
node3.example.com
node4.example.com
node5.example.com
Configure these nodes to be in an inventory file where node I is a member of group dev. nodc2 is a member of group test, node3 is a member of group proxy, nodc4 and node 5 are members of group prod. Also, prod is a member of group webservers.

NO.36 Create a playbook called regulartasks.yml which has the system that append the date to /root/datefile every day at noon. Name is job ‘datejob’

NO.37 Create an ansible vault password file called lock.yml with the password reallysafepw in the /home/sandy/ansible directory. In the lock.yml file define two variables. One is pw_dev and the password is ‘dev’ and the other is pw_mgr and the password is ‘mgr’ Create a regular file called secret.txt which contains the password for lock.yml.