Pass MD-100 Brain Dump Updated Certification Sample Questions [Q176-Q194]

5/5 - (1 vote)

Pass MD-100 Brain Dump Updated Certification Sample Questions

Online MD-100 Test Brain Dump Question and Test Engine

What Certifications Can Be Earned After the Microsoft MD-100 Exam?

Since acing MD-100 exam along with MD-101 earns one the Modern Desktop Administrator Associate certificate, it also paves the way for further improvement. This certification is one of the optional prerequisites for Microsoft 365 Certified: Enterprise Administrator Expert certification which is a sign of expert-level proficiency. To acquire it, applicants should only pass two exams, namely MS-100 and MS-101.

Study practices

You cannot deny the fact that the Microsoft exams can be a little difficult for some students. So, if you want to clear Microsoft MD-100 with a decent score, it is imperative that you spend the right amount of time studying each topic. For this reason, it is advised that you start preparing for the test a few weeks or months before the actual exam date. Moreover, you need to create a plan for your actions.

There are many resources that you can use to study for this test, so the choice is all yours. You can go for exam dumps, the official study options and materials, courses, video lectures, and so on. It doesn’t matter which resources you use, you should take a few practice tests to evaluate your knowledge level.

Q176. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows10.
A service named Application1 is configured as shown in the exhibit.

You discover that a user used the Service1 account to sign in to Computer1 and deleted some files.
You need to ensure that the identity used by Application1 cannot be used by a user to sign in to sign in to the desktop on Computer1. The solution must use the principle of least privilege.
Solution: On Computer1, you configure Application1 to sign in as the LocalSystem account and select the Allow service to interact with desktop check box. You delete the Service1 account.
Does this meet the goal?

Yes

Q177. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that runs Windows 10. The computer contains a folder. The folder contains sensitive data.
You need to log which user reads the contents of the folder and modifies and deletes files in the folder.
Solution: From the properties of the folder, you configure the Auditing settings and from Audit Policy in the local Group Policy, you configure Audit object access.
Does this meet the goal?

Yes

Q178. You have computers that run Windows 10 and are configured as shown in the following table.

You have a removable USB drive named USBDrive1 that is encrypted by using BitLocker to Go.
You plan to use USBDrive1 on Computer1, Computer2, and Computer3.
You need to identify on which computers you can enable automatic unlocking of BitLocker on USBDrive1.
Which computers should you identify?

Computer2 and Computer3 only

Computer3 only

Computer1 and Computer3 only

Computer1, Computer2, and Computer3

Q179. You have a file named Reg1.reg that contains the following content.

What is the effect of importing the file?

A key named command will be renamed as notepad.exe.

In a key named Notepad, the command value will be set to @=”notepad.exe”.

In a key named command, the default value will be set to notepad.exe.

Q180. You have a computer named Computer1 that runs Windows 10.
Computer1 contains the folders shown in the following table.

You include Folder1, Folder2, and Folder3 in the Documents library.
You configure File History to run every 15 minutes, and then turn on File History.
For each of the following statements, select Yes if the statement in true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Q181. You have a computer named Computer1 that runs Windows 10. Computer1 contains a folder named Folder1.
You need to log any users who take ownership of the files in Folder1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Modify the folder attributes of Folder1.

Modify the Advanced Security Settings for Folder1.

From a Group Policy object (GPO), configure the Audit Sensitive Privilege Use setting.

From a Group Policy object (GPO), configure the Audit File System setting.

Install the Remote Server Administration Tools (RSAT).

Q182. You have a computer named Computer1 that runs Windows 10.
On Computer1, you create a VPN connection as shown in the following exhibit.

The corporate network contains a single IP subnet.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Q183. Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn’t matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597

You need to create a file named File1.txt in a folder named Folder1 on the C drive of Client2. You need to ensure that a user named User1 can read the contents of File1.txt. The solution must prevent User1 from modifying the file.
To complete this task, sign in to Client2 and perform the required action.

Q184. You have a computer named Computer1 that runs Windows 10. Computer1 belongs to a workgroup.
You run the following commands on Computer1.
New-LocalUser -Name User1 -NoPassword
Add-LocalGroupMember User -Member User1
What is the effect of the configurations?

User1 is prevented from signing in until the user is assigned additional user rights.

User1 appears on the sign-in screen and can sign in without a password.

User1 is prevented from signing in until an administrator manually sets a password for the user.

User1 appears on the sign-in screen and must set a new password on the first sign-in attempts.

Q185. You need to take remote control of an employee’s computer to troubleshoot an issue.
What should you send to the employee to initiate a remote session?

a numeric security code

a connection file

an Easy Connect request

a password

Q186. You plan to deploy Windows 10 Enterprise to company-owned devices.
You capture a Windows 10 image file from a reference device.
You need to generate catalog files and answer files for the deployment.
What should you use for each file? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q187. You need to meet the technical requirements for EFS on ComputerA.
What should you do?

Run certutil.exe, and then add a certificate to the local computer certificate store.

Run cipher.exe, and then add a certificate to the local computer certificate store.

Run cipher.exe, and then add a certificate to the local Group Policy.

Run certutil.exe, and then add a certificate to the local Group Policy.

Q188. You have two computers named Computer1 and Computer2 that run Windows 10. The computers are in a workgroup.
You perform the following configurations on Computer1:
* Create a user named User1.
* Add User1 to the Remote Desktop Users group.
You perform the following configurations on Computer2:
* Create a user named User1 and specify the same user password as the one set on Computer1.
* Create a share named Share2 and grant User1 Full control access to Share2.
* Enable Remote Desktop.
What are the effects of the configurations? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Q189. Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains the users shown in the following table.

You have a computer named Computer1 that runs Windows 10 and is in a workgroup.
A local standard user on Computer1 named User1 joins the computer to the domain and uses the credentials of User2 when prompted.
You need to ensure that you can rename Computer1 as Computer33.
Solution: You use the credentials of User2 on Computer1.
Does this meet the goal?

Yes

Q190. You have a computer named Computer1 that runs Windows 10.
You need to enable boot logging on Computer1.
What should you do?

At a command prompt, run the bcdboot.execommand and specify the /vparameter.

From the Settings app, configure the Start settings.

From System Properties in Control Panel, configure the Startup and Recovery settings.

From System Configuration configure the Boot settings.

Q191. Your network contains an Active Directory domain that contains the objects shown in the following table.

Computer1 contains the shared folders shown in the following table.

The computers have the network configurations shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Q192. You have a computer named Computer1 that runs Windows 10.
You need to modify the Security Settings of Computer1 to meet the following requirements:
A local group named Branch_Admins must be able to view and clear the Security log.
Local users must be prompted to change their password three days before the password expires.
Which two nodes of the Local Group Policy Editor should you access to configure the settings? To answer, select the appropriate nodes in the answer area.
NOTE: Each correct selection is worth one point.

Q193. Your network contains an Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2 that run Windows 10 and are joined to the domain.
On Computer1, you create an event subscription named Subscription1 for Computer2 as shown in the Subscription1 exhibit. (Click the Subcription1

Subscription1 is configured to use forwarded events as the destination log.
On Computer1, you create a custom view named View1 as shown in the View1 exhibit. (Click the View1 tab.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Q194. You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contain the users shown in the following table.

You have a computer named Computer1 that runs Windows 10.

User1 joins Computer1 to Azure AD by using [email protected].
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.