Download Exam 156-315.81 Practice Test Questions with 100% Verified Answers [Q117-Q135]

Rate this post

Download Exam 156-315.81 Practice Test Questions with 100% Verified Answers

Share Latest 156-315.81Test Practice Test Questions, Exam Dumps

In order to prepare for the CheckPoint 156-315.81 exam, candidates must have completed the Check Point Security Administration course and have practical experience working with Check Point Security solutions. Additional study materials are also available, including Check Point’s official study guide, online training courses, and practice exams. It is recommended that candidates spend sufficient time studying and practicing before attempting the exam.

NEW QUESTION 117
When setting up an externally managed log server, what is one item that will not be configured on the R81 Security Management Server?

SIC

NAT

FQDN

NEW QUESTION 118
SandBlast has several functional components that work together to ensure that attacks are prevented in real-time. Which the following is NOT part of the SandBlast component?

Threat Emulation

Mobile Access

Mail Transfer Agent

Threat Cloud

NEW QUESTION 119
What command is used to manually failover a cluster during a zero downtime upgrade?

set cluster member down

cpstop

clusterXL_admin down

set clusterXL down

NEW QUESTION 120
What is the best method to upgrade a Security Management Server to R81.x when it is not connected to the Internet?

CPUSE offline upgrade only

Advanced upgrade or CPUSE offline upgrade

Advanced Upgrade only

SmartUpdate offline upgrade

NEW QUESTION 121
What is mandatory for ClusterXL to work properly?

The number of cores must be the same on every participating cluster node

The Magic MAC number must be unique per cluster node

The Sync interface must not have an IP address configured

If you have “Non-monitored Private” interfaces, the number of those interfaces must be the same on all cluster members

NEW QUESTION 122
Fill in the blanks: In the Network policy layer, the default action for the Implied last rule is ____ all traffic.
However, in the Application Control policy layer, the default action is ______ all traffic.

Accept; redirect

Accept; drop

Redirect; drop

Drop; accept

NEW QUESTION 123
What is the name of the secure application for Mail/Calendar for mobile devices?

Capsule Workspace

Capsule Mail

Capsule VPN

Secure Workspace

NEW QUESTION 124
How many images are included with Check Point TE appliance in Recommended Mode?

2(OS) images

images are chosen by administrator during installation

as many as licensed for

the newest image

NEW QUESTION 125
What solution is multi-queue intended to provide?

Improve the efficiency of traffic handling by SecureXL SNDs

Reduce the confusion for traffic capturing in FW Monitor

Improve the efficiency of CoreXL Kernel Instances

Reduce the performance of network interfaces

NEW QUESTION 126
What a valid SecureXL paths in R81.10?

F2F (Slow path). Templated Path. PQX and F2V

F2F (Slow path). PXL, QXL and F2V

F2F (Slow path), Accelerated Path, PQX and F2V

F2F (Slow path), Accelerated Path, Medium Path and F2V

Explanation
The valid SecureXL paths in R81.10 are F2F (Slow path), Accelerated Path, Medium Path and F2V
1. SecureXL is a technology that accelerates the performance of the Security Gateway by offloading CPU-intensive operations to the SecureXL device2. SecureXL uses different paths to process packets, depending on the type and state of the connection3. The SecureXL paths are3:
F2F (Slow path): This path handles packets that require a full inspection by the Firewall kernel. It is the slowest path, but it supports all features and blades. Examples of packets that use this path are packets that belong to a new connection, packets that match a rule with UTM blades, or packets that require address translation.
Accelerated Path: This path handles packets that belong to an established connection that does not require any further inspection by the Firewall kernel. It is the fastest path, but it supports only a limited set of features and blades. Examples of packets that use this path are packets that match an accept rule with no UTM blades, or packets that match a rule with SecureXL acceleration enabled.
Medium Path: This path handles packets that belong to an established connection that requires some inspection by the Firewall kernel, but not a full inspection. It is faster than the F2F path, but slower than the Accelerated path. It supports more features and blades than the Accelerated path, but less than the F2F path. Examples of packets that use this path are packets that match a rule with IPS or Anti-Bot blades, or packets that require NAT templates.
F2V: This path handles packets that are encapsulated or decapsulated by the VPN kernel. It is faster than the F2F path, but slower than the Accelerated path. It supports VPN features such as encryption, decryption, encapsulation, and decapsulation. References: R81.x Security Gateway Architecture (Logical Packet Flow) – Check Point CheckMates, SecureXL Mechanism in R80.10 and above – Check Point Software, SecureXL – Check Point Software

NEW QUESTION 127
How many users can have read/write access in Gaia at one time?

Infinite

One

Three

Two

NEW QUESTION 128
You have used the “set inactivity-timeout 120” command to prevent the session to be disconnected after 10 minutes of inactivity. However, the Web session is being disconnected after 10 minutes. Why?

The idle timeout for the web session is specified with the “set web session-timeout” command.

The number specified is the amount of the idle timeout in seconds rather than in minutes. So you have to use the command “set inactivity-timeout 600” instead.

Probably, you have forgotten to make sure that nobody is accessing the management server via the SmartConsole which locks the management database.

The number of minutes is correct. Probably, you have forgotten to save this setting with the “save config” command.

NEW QUESTION 129
If a “ping”-packet is dropped by FW1 Policy -on how many inspection Points do you see this packet in “fw monitor”?

“i”, “l” and “o”

I don’t see it in fw monitor

“i” only

“i” and “l”

NEW QUESTION 130
As a valid Mobile Access Method, what feature provides Capsule Connect/VPN?

That is used to deploy the mobile device as a generator of one-time passwords for authenticating to an RSA Authentication Manager.

Fill Layer4 VPN -SSL VPN that gives users network access to all mobile applications.

Full Layer3 VPN -IPSec VPN that gives users network access to all mobile applications.

You can make sure that documents are sent to the intended recipients only.

NEW QUESTION 131
What two ordered layers make up the Access Control Policy Layer?

URL Filtering and Network

Network and Threat Prevention

Application Control and URL Filtering

Network and Application Control

NEW QUESTION 132
What does it mean if Deyra sees the gateway status? (Choose the BEST answer.)

SmartCenter Server cannot reach this Security Gateway.

There is a blade reporting a problem.

VPN software blade is reporting a malfunction.

Security Gateway’s MGNT NIC card is disconnected.

NEW QUESTION 133
What is “Accelerated Policy Installation”?

Starting R81, the Desktop Security Policy installation process is accelerated thereby reducing the duration of the process significantly

Starting R81, the QoS Policy installation process is accelerated thereby reducing the duration of the process significantly

Starting R81, the Access Control Policy installation process is accelerated thereby reducing the duration of the process significantly

Starting R81, the Threat Prevention Policy installation process is accelerated thereby reducing the duration of the process significantly

NEW QUESTION 134
You have a Gateway is running with 2 cores. You plan to add a second gateway to build a cluster and used a device with 4 cores.
How many cores can be used in a Cluster for Firewall-kernel on the new device?

NEW QUESTION 135
What is the responsibility of SOLR process on R81.20 management server?

Validating all data before it’s written into the database

It generates indexes of data written to the database

Communication between SmartConsole applications and the Security Management Server

Writing all information into the database

CheckPoint 156-315.81 exam is a certification exam that validates the skills and knowledge of candidates in implementing, managing, and troubleshooting Check Point Security solutions. 156-315.81 exam is designed for those who have completed the Check Point Security Administration course and have experience working with Check Point Security solutions. Passing 156-315.81 exam enables candidates to become Check Point Certified Security Experts and demonstrates their expertise in implementing and managing Check Point Security solutions.

Positive Aspects of Valid Dumps 156-315.81 Exam Dumps!: https://www.prepawayexam.com/CheckPoint/braindumps.156-315.81.ete.file.html