VCP-NV 2023 2V0-41.23 Dumps Full Questions with Free PDF Questions to Pass [Q38-Q60]

NEW QUESTION 38
What is the VMware recommended way to deploy a virtual NSX Edge Node?

Through the OVF command line tool

Through the vSphere Web Client

Through automated or Interactive mode using an ISO

Through the NSXUI

NEW QUESTION 39
Which two of the following are used to configure Distributed Firewall on VDS? (Choose two.)

vSphere API

NSX API

NSX CU

vCenter API

NSX UI

NEW QUESTION 40
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

get time-server

set timezone

get timezone

set ntp-server

NEW QUESTION 41
Hotspot Question
Refer to the exhibit. Which two items must be configured to enable OSPF for the Tier-0 Gateway in the image? Mark your answers by clicking twice on the image.

NEW QUESTION 42
Which troubleshooting step will resolve an error with code 1001 during the configuration of a time-based firewall rule?

Reinstalling the NSX VIBs on the ESXi host.

Restarting the NTPservice on the ESXi host.

Changing the lime zone on the ESXi host.

Reconfiguring the ESXI host with a local NTP server.

NEW QUESTION 43
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

Loopback Router Port

VLAN Uplink

Service interface

Downlink interface

NEW QUESTION 44
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)

Thin Agent

RAPID

Security Hub

IDS/IPS

Security Analyzer

Reputation Service

Explanation
B: RAPID. This is correct. RAPID stands for Real-time Anti-malware Protection with Intelligent Detection. It is a component of the NSX Edge node that provides malware prevention for the north-south traffic. RAPID extracts files from the network traffic and analyzes them for malicious behavior using hash-based detection, local analysis, and cloud analysis techniques1 D: IDS/IPS. This is correct. IDS/IPS stands for Intrusion Detection and Prevention System. It is a component of the NSX Edge node that provides intrusion detection and prevention for the north-south traffic. IDS/IPS monitors the network traffic and compares it against a known set of signatures that specify patterns for different types of network intrusions. IDS/IPS can generate alerts or block the traffic based on the matching signatures and the configured actions2 F: Reputation Service. This is correct. Reputation Service is a component of the NSX Edge node that provides reputation-based filtering for the north-south traffic. Reputation Service uses a cloud-based database of known malicious IP addresses and domains to block or allow the traffic based on the reputation score of the source or destination. Reputation Service can also integrate with third-party reputation providers to enhance the security coverage3 A: Thin Agent. This is incorrect. Thin Agent is not a component of the NSX Edge node, but rather a component of the NSX Guest Introspection platform that runs on the virtual machine endpoints in the distributed east-west traffic. Thin Agent enables communication between the virtual machines and the NSX Manager, and facilitates malware prevention and intrusion detection on the host level.
C: Security Hub. This is incorrect. Security Hub is not a component of the NSX Edge node, but rather a component of the VMware Cloud Services platform that provides a unified view of security posture across multiple cloud environments. Security Hub integrates with NSX Advanced Threat Prevention to collect and display security events, alerts, and recommendations from NSX IDS/IPS and NSX Malware Prevention features.
E: Security Analyzer. This is incorrect. Security Analyzer is not a real product name or component name related to NSX Edge or NSX Advanced Threat Prevention. It is a fictional name that does not exist in the VMware portfolio.
To learn more about NSX Edge components for North-South Malware Prevention, you can refer to the following resources:
VMware NSX Documentation: Overview of NSX IDS/IPS and NSX Malware Prevention 2 VMware NSX Documentation: Configure North-South Malware Prevention 1 VMware NSX Documentation: Configure North-South Intrusion Detection and Prevention VMware NSX Documentation: Configure North-South Reputation-Based Filtering 3

NEW QUESTION 45
When collecting support bundles through NSX Manager, which files should be excluded for potentially containing sensitive information?

Audit Files

Core Files

Management Files

Controller Files

NEW QUESTION 46
An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.
Which is the correct way to implement this change?

Send an API call to https://<nsx-mgr>/api/v1/cluster/api-certificate?
action=set_cluster_certificate&certificate_id=<certificate_id>

Send an API call to https://<nsx-mgr>/api/v1/node/services/http?
action=apply_certificate&certificate_id=<certificate_id>

SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install
<certificate_id>

SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install <certificate_id>

NEW QUESTION 47
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

Graceful Restart

BGP Neighbors

Local AS

Route Distribution

Route Aggregation

NEW QUESTION 48
What are two functions of the Service Engines in NSX Advanced Load Balancer? (Choose two.)

It collects real-time analytics from application traffic flows.

It stores the configuration and policies related to load-balancing services.

It performs application load-balancing operations.

It deploys web servers to perform load-balancing operations.

It provides a user interface to perform configuration and management tasks.

NEW QUESTION 49
A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?

Profile

Service

Source

Policy

NEW QUESTION 50
Which two of the following will be used for Ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Downlink Interface for the Tier-0 OR

Downlink Interface for the Tier-1 DR

Inter-Tier Interface on the Tier-0 gateway

Tler-0 Uplink Interface H Tier-1 SR Router Port

NEW QUESTION 51
A company security policy requires all users to log Into applications using a centralized authentication system.
Which two authentication, authorization, and accounting (AAA) systems are available when Integrating NSX with VMware Identity Manager? (Choose two.)

RADII 2.0

Keyoen Enterprise

RSA SecurelD

LDAP and OpenLDAP based on Active Directory (AD)

SecureDAP

NEW QUESTION 52
Which Is the only supported mode In NSX Global Manager when using Federation?

Controller

Policy

Proxy

Proton

NEW QUESTION 53
Where in the NSX UI would an administrator set the time attribute for a time-based Gateway Firewall rule?

The option to set time-based rule is a clock Icon in the rule.

The option to set time based rule is a field in the rule Itself.

There Is no option in the NSX UI. It must be done via command line interface.

The option to set time-based rule is a clock Icon in the policy.

NEW QUESTION 54
A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?

Profile

Service

Policy

Source

NEW QUESTION 55
Which two choices are solutions offered by the VMware NSX portfolio? (Choose two.)

VMware Aria Automation

VMware NSX Distributed IDS/IPS

VMware NSX Advanced Load Balancer

VMware Tanzu Kubernetes Grid

VMware Tanzu Kubernetes Cluster

NEW QUESTION 56
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgld) should be used in the syslog export configuration command as a filler?

MONISTORING

SYSTEM

GROUPING

FABRIC

NEW QUESTION 57
What are two valid BGP Attributes that can be used to influence the route path traffic will take? (Choose two.)

AS-Path Prepend

BFD

Cost

MED

NEW QUESTION 58
Which two CLI commands could be used to see if vmnic link status is down? (Choose two.)

esxcfg-nics -1

excli network nic list

esxcli network vswitch dvs wmare list

esxcfg-vmknic -1

esxcfg-vmsvc/get.network

NEW QUESTION 59
How is the RouterLink port created between a Tier-1 Gateway and Tier-O Gateway?

Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Automatically created when Tier-1 is created.

Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.

Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.

NEW QUESTION 60
Hotspot Question
Refer to the exhibit. An administrator configured NSX Advanced Load Balancer to redistribute the traffic between the web servers. However, requests are sent to only one server.
Which of the following pool configuration settings needs to be adjusted to resolve the problem?
Mark the correct answer by clicking on the image.

Prepaway Exam Dumps

VCP-NV 2023 2V0-41.23 Dumps Full Questions with Free PDF Questions to Pass [Q38-Q60]

Leave a Reply Cancel reply