350-801 Premium Files Updated Nov-2023 Practice Valid Exam Dumps Question [Q126-Q150]

4/5 - (1 vote)

350-801 Premium Files Updated Nov-2023 Practice Valid Exam Dumps Question

Practice with 350-801 Dumps for CCNP Collaboration Certified Exam Questions & Answer

Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Collaboration applications

The following will be discussed in CISCO 350-801 exam dumps:

Describe Cisco Unity Connection call handlers
Describe Cisco Unified IM&P protocols and deployment
Configure Cisco Unity Connection SIP integration options to call control
Configure Cisco Unity Connection mailbox and MWI

To prepare for the Cisco 350-801 certification exam, candidates must have a strong understanding of collaboration technologies, including voice and video technologies, network infrastructure, and call control. Candidates can also enroll in Cisco-approved training courses to enhance their knowledge and skills in collaboration technologies. These courses can help candidates learn about the latest trends and best practices in collaboration technologies, and prepare them for the certification exam.

NEW QUESTION 126
According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

NEW QUESTION 127
Which DSCP value and PHB equivalent are the default for audio calls?

46 and EF

34 and AF41

32 and AF41

32 and CS4

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_dfsrv/configuration/15-mt/qos-dfsrv-15-mt- book/qos-dfsrv.html

NEW QUESTION 128
A collaboration engineer configures Global Dial Plan Replication for multiple Cisco UCM clusters. The local cluster acts as the hub cluster and the remaining clusters act as spoke clusters. Which service must the engineer configure on the local cluster?

Location Conveyance on intercluster SIP trunks

intra-Cluster Communication Signaling

Mobility Cross Cluster

Intercluster Lookup Service

NEW QUESTION 129
How does an administrator make a Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Configure a translation pattern that has a Calling Party Transform Mask of XXXXXXXXXX.

On the inbound SIP trunk, change Significant Digits to 10.

Change the service parameter Apply Transformations On Remote Number to True.

Configure a calling party transformation pattern that keeps only the last 10 digits.

NEW QUESTION 130
AN administrator needs to help remote employee make a free call to an international destination.
The administrator calls the employee, then conferences in the international party. The administrator drops the call, and the employee and the international party continue their conversation. Which action prevents this type of toll fraud in the Cisco USM?

Set service parameter “Advanced Ad Hoc Conference” to FALSE

Set service parameter “Drop Ad Hoc Conference” to “Do not allow outside parties “

Set service parameter “Drop Ad Hoc Conference” to “When Conference Controller leaves”

Set service parameter “Advanced Ad Hoc Conference” to 2.

NEW QUESTION 131
An administrator troubleshoots call flows and suspects that there are issues with the dial plan.
Which tool enables a quick analysis of the dial plan and provides call flows of dialed digits?

Digit Analysis Analyzer

Dialed Number Analyzer

Cisco Dial Plan Analyzer

Dial Plan Analyzer

NEW QUESTION 132
A remote office has a less-than-optimal WAN connection and experiences packet loss, delay and jitter. Which VoIP codec is used in this situation?

G722.1

iLBC

G.711alaw

G.729A

NEW QUESTION 133
An administrator configures international calling on a Cisco UCM cluster and wants to minimize the number of route patterns that are needed.
Which route pattern enables the administrator to match variable-length numbers?

9.011@

9.011#

9.011*

9.011!

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/3_1_2/ccmcfg/b03spchr.html

NEW QUESTION 134
Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?

local disk on the Cisco UCM server

remote disk on the SFTP server

remote disk on a CIFS share

remote disk on an NFS share

Section: Infrastructure and Design
Explanation/Reference: https://www.learncisco.net/courses/cucm-basics/serviceability-backup-and-restore/backing-up-and- restoring-cucm.html

NEW QUESTION 135
Refer to the exhibit.

When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?

IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)

SIP TLS (A) +SIP TLS (B) +SIP TLS (C)

SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)

SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)

NEW QUESTION 136
Given this H.323 gateway configuration and using cisco best practices, how must the called party transformation pattern to ensure that a proper ISDN type of number is set?

A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 137
Refer to the exhibit. An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful.
What is the cause of this issue and how should it be resolved?

The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.

DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.

An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.

An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

NEW QUESTION 138
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?

NEW QUESTION 139
Refer to the exhibit.

Refer to the exhibit. Endpoint A calls endpoint B. What is the only audio codec that is used for the call?

G722/8000

Telephone-event/8000

G7221/16000

PCMA/8000

NEW QUESTION 140

Refer to the exhibit The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?

DTMF was negotiated properly in these messages.

G.729 rather than G.711ulaw was negotiated.

Payload type 110 was negotiated rather than type 101.

DTMF was not negotiated on the call.

NEW QUESTION 141
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 142
Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan. How long is the default wait time?

5 seconds

10 seconds

15 seconds

20 seconds

Default timeout for CUBEs/VGs is 10 seconds
Default timeout for CUCM is 15 seconds (T302)

NEW QUESTION 143
A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol Which two features must be enabled on SIP security profiles? (Choose two)

Accept presence subscription

Enable application level authorization.

Allow charging header

Accept replaces header

Accept unsolicited notification

NEW QUESTION 144
Refer to the exhibit.

An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?

The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.

DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.

An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.

An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

NEW QUESTION 145
What is set when using CoS to mark an Ethernet frame?

IPP bits

DCSP bits

IP ECN bits

802.1p User Priority bits

Section: QoS

NEW QUESTION 146
An engineer configures Cisco Unified Communications Manager to prevent toll fraud. At which two points does the engineer block the pattern in Cisco Unified CM to complete this task? (Choose two.)

route pattern

route group

translation pattern

partition

CSS

Section: Call Control

NEW QUESTION 147
An administrator configures Cisco UCM to use UDP for SIP signaling and finds that an endpoint cannot make calls.
Which action resolves this issue?

Change the phone security profile.

Change the SIP dial rules.

Change the SIP profile

Change the common phone profile.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/11_5_1/secugd/CUCM_BK
_SEE2CFE1_00_cucm-security-guide-1151/CUCM_BK_SEE2CFE1_00_cucm-security-guide-
1151_chapter_0111.html

NEW QUESTION 148
Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?

Cisco CallManager SNMP

SNMP Master Agent

Connection SNMP Agent

Host Resources Agent

NEW QUESTION 149
An engineer is configuring a phone system CISCO UCM and wants to activate TFTP service. The engineer selects the serviceability page for configuration. Which nodes configurable for TFTP?

any two nodes

any node

only nodes that have Cisco UCM service enabled

any subscriber nodes

TFTP is a network protocol that is used to transfer files between devices. It is often used to transfer firmware and configuration files to network devices. In order to use TFTP, the device must have a TFTP server configured.
In Cisco UCM, the TFTP server is configured on the serviceability page. The TFTP server can be configured on any node that has Cisco UCM service enabled. The TFTP server cannot be configured on nodes that do not have Cisco UCM service enabled.

NEW QUESTION 150
An engineer implements a new Cisco UCM based telephony system per these requirements:
* The local Ethernet bandwidth is sized based on the total bandwidth per call
* A G.736 codec is used.
* The bit rate is 64 kbps
* The codec sample interval is 10 ms.
* The voice payload size is 160 bytes per 20 ms.
What should the size of the Ethernet bandwidth be per call?

31 2 kbps

38.4 kbps

55.2 kbps

87.2 kbps

Loading …