Q67. Which unit of measurement, as formally defined, is an absolute unit that is used to quantify received signal power levels on a logarithmic scale?

Q68. A string of characters and digits is entered into an AP and a client STA for WPA2 security. The string is 8 characters long. What is this string called?

Q69. 802. 11ax (HE) introduces Resource Units that can be used to allow communications with multiple devices at the same time, on the same channel, in the same BSS. What feature of 802.1 lax provides this functionality?

Q70. In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?

Q71. You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

Q72. Three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. Assuming no other APs are in the vicinity, is CCI still a possibility in this network and why?

Q73. A WLAN transmitter that emits a 50 mW signal is connected to a cable with 3 dB loss. If the cable is connected to an antenna with 9dBi gain, what is the EIRP at the antenna element?

Q74. When compared with legacy Power Save mode, how does VHT TXOP power save improve battery life for devices on a WLAN?

Q75. Lynne runs a small hotel, and as a value added service for his customers he has implemented a Wi-Fi hot-spot.
Lynne has read news articles about how hackers wait at hot-spots trying to take advantage of unsuspecting users. He wants to avoid this problem at his hotel.
What is an efficient and practical step that Lynne can take to decrease the likelihood of active attacks on his customers’ wireless computers?

Q76. You are implementing a VHT-capable AP. Which one of the following channels is available in the
802.11-2016 standard that was not available before the ratification of 802.11 ac?

Q77. You are troubleshooting a client issue on a Windows laptop. The laptop can see and connect to 2.4 GHz APs, but is does not even see 5 GHz APs. While evaluating the issue, you determine that this problem is happening for all of the laptops of this model in the organization. Several other tablets connect on channel 48 and channel 52 in the same work areas. What is the likely problem?

Q78. You are a small business wireless network consultant and provide WLAN services for various companies.
You receive a call from one of your customers stating that their laptop computers suddenly started experiencing much slower data transfers while connected to the WLAN. This company is located in a multi- tenant office building and the WLAN was designed to support laptops, tablets and mobile phones. What could cause a sudden change in performance for the laptop computers?

Q79. When using a spectrum to look for non Wi-Fi interference sources, you notice significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a users workspace, but the interference disappears quickly after just 2 meters. What is the most likely cause of this interference?

Q80. What factors will have the most significant impact on the amount of wireless bandwidth available to each station within a BSS? (Choose 2)

Q81. You have implemented an 802.11ax WLAN for a customer. All APs are four stream HE APs. The customer states that it is essential that most of the clients can use the OFDMA modulation scheme. What do you tell the customer?

Q82. What is the most effective method for testing roaming in relation to 802.11 VoIP handsets?

Q83. You are reporting on the RF environment in your facility. The manager asks you to describe the noise floor noted in the report. Which of the following is the best explanation?

Q84. You are installing an AP to be used by 27 laptops. All laptops will connect on the 5 GHz frequency band. A neighbor network uses channels 1 and 6. What channel should be used for this AP and why?

Q85. You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day. You analyze the workspace outside of business hours and detect a strong signal with a typical noise floor at the client location. During working hours, the user works with a laptop in the area and uses an external USB hard drive for continuous data access. The user also states that the laptop works as expected on her home network. The user working approximately 8 feet away from this client experiences no problems.
Based on this information, what is the likely cause of the problem?

Q86. You are deploying a WLAN monitoring solution that utilizes distributed sensor devices. Where should sensors be deployed for best results? Choose the single best answer.

Q87. A natural disaster has occurred in a remote area that is approximately 57 miles from the response team headquarters. The response team must implement a local wireless network using 802.11 WLAN access points.
What is the best method, of those listed, for implementation of a network back-haul for communications across the Internet in this scenario?

Q88. The BSA of an AP covers the area used by the sales and marketing department. Thirty-five stations operate in this space. The users indicate that they need more throughput and all stations are 5 GHz capable 802.11ac clients. The current AP configuration uses 20 MHz channels in both 2.4 GHz and 5 GHz. What is the least expensive solution available for increasing throughput for these users without implementing configuration options that are not recommended?

Q89. What best describes WPA2 in relation to 802.11 wireless networks?

Q90. What primary metric of scanning can stations use to select the best AP for connectivity to the desired BSS?