C_IBP_2105 – Prepaway Exam Dumps

Free C_IBP_2105 Braindumps Download Updated on Jun 17, 2022 with 82 Questions

SAP C_IBP_2105 Exam Practice Test Questions

NEW QUESTION 10
Which features apply to quota violations modeled with the optimizer?

Min and Max Quotas have to be the same as sourcing ratios.

Quotas require sourcing ratios to be maintained.

Quota violation cost is maintained as an attribute as a key figure.

Quotas can be modeled for sourcing location, production, and consensus demand.

NEW QUESTION 11
Which conditions are prerequisites for key figure disaggregation?

The key figure is stored and editable.

The key figure is calculated and editable.

The key figure is calculated and aggregation mode is selected.

The key figure is set to Not Editable.

NEW QUESTION 12
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.

Selecting by attribute with option ‘contain’ is possible.

Specifying target key figure is mandatory.

Specifying source key figure is mandatory.

Specifying target key figure that is time independent is possible.

NEW QUESTION 13
You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?

SAP IBP for Sales and Operations Planning

SAP IBP for Demand

SAP IBP for Demand Driven Replenishment

SAP IBP for Inventory

NEW QUESTION 14
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.

Configure at least one calculated key figure for the planning area.

Configure at most two input key figures on the same planning level in a key figure calculation.

Specify a planning horizon in the planning area for each level of the assigned time profile.

Assign the compound master data type and its component master data types.

NEW QUESTION 15
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

Flag ‘Disable Substitution of Location Products’

NEW QUESTION 16
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Capacity leveling will be possible for production and storage resources.

Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.

Enough demands can be pulled forward and pull production will occur.

NEW QUESTION 17
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.

Snapshot operator in the SAP IBP add-in for Microsoft Excel

Supply chain graph in Supply Chain Network app

Jobs in the Applications Jobs app

Planning view templates in the SAP IBP add-in for Microsoft Excel

NEW QUESTION 18
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.

Target inventory violation cost should be greater than inventory holding cost rate.

Target inventory violation cost should be less than max inventory violation cost.

Target inventory violation cost should be greater than discount for demand lateness.

Target inventory violation cost should be less than transportation cost rate.

NEW QUESTION 19
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.

You can export from a planning area that is on a different release.

You can move a transported item from one collection to another.

You can choose to import only some of the items that were exported.

You can create a collection of items and export it.

NEW QUESTION 20
How can you check if key figure is editable or non-editable?

Using the Key Figure Calculations app

Using the Edit View and then the Edit Planning View option

Using the Analytics Advanced app when selecting key figures

Using the Web-based Planning app when selecting key figures

NEW QUESTION 21
Which of the following is one of the functions of multi-echelon inventory optimization?

Ability to maintain high external service levels with high internal service levels

Ability to maintain high external service levels with low internal service levels

Ability to optimize delivery costs between different locations

Ability to optimize lead times between different locations

NEW QUESTION 22
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID3” =”$$PERIODID3CU$$…)

IF(“PERIODID4” =”$$PERIODID4CU$$…)

IF(“PERIODID2” =”$$PERIODID2CU$$…)

NEW QUESTION 23
Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Non-Confirming Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Key Figure Data

Purge Master Data

NEW QUESTION 24
How many different time levels can be selected within one planning view?

Only time levels from the base planning level of selected key figures

Only base time levels of the planning area

All time levels available in the time profile, restricted by global configuration parameter

All time levels available in the time profile

NEW QUESTION 25
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

The calculation chain for a key figure must always result in a calculated key figure.

Key figures can be calculated across different planning levels.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

NEW QUESTION 26
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.

Not-fully satisfied demands

Not respecting production capacity

Violation of minimum resource utilization

Not adhering to maximum transport values

Violation of minimum aggregated inventory values

NEW QUESTION 27
Which one of the following values can you use in disaggregation expressions?

KF1 (Calculated) + Attribute

If (Attribute)=0

KF1 (Stored) + KF2 (Stored) + Attribute

KF1 (Stored) + Helper KF

NEW QUESTION 28
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.

These filters can be used together with attribute totals in the same planning view.

These filters are always applied based on the values stored in the database.

You can only apply one value-based filter per planning view.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

Loading …

C_IBP_2105 Exam Certification Details:

Level:	Associate
Duration:	180 mins
Exam:	80 questions

SAP C_IBP_2105 Exam Description:

The “SAP Certified Application Associate – SAP Integrated Business Planning” certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)

Updated Verified C_IBP_2105 dumps Q&As – Pass Guarantee or Full Refund: https://www.prepawayexam.com/SAP/braindumps.C_IBP_2105.ete.file.html

Prepaway Exam Dumps

Category: C_IBP_2105

Free C_IBP_2105 Braindumps Download Updated on Jun 17, 2022 with 82 Questions [Q10-Q28]

C_IBP_2105 Exam Certification Details:

SAP C_IBP_2105 Exam Description:

Category Archives: C_IBP_2105

C_IBP_2105 Exam Certification Details:

SAP C_IBP_2105 Exam Description: