200-301 Exam Cram – Prepaway Exam Dumps

Read Online 200-301 Test Practice Test Questions Exam Dumps

Easily To Pass New 200-301 Premium Exam Updated [Dec 24, 2025]

Cisco 200-301 Exam Certification Details:

Exam Registration	PEARSON VUE
Passing Score	Variable (750-850 / 1000 Approx.)
Duration	120 minutes
Exam Code	200-301 CCNA

QUESTION 692
Drag and drop the use cases for device-management technologies from the left onto the corresponding.

Explanation:

QUESTION 693
Refer to the exhibit.

What is the result if Gig1/11 receives an STP BPDU?

The port transitions to STP blocking

The port transitions to the root port

The port immediately transitions to STP forwarding.

The port goes into error-disable state

QUESTION 694
Drag the descriptions of device management from the left onto the types of device management on the right.

QUESTION 695
Refer to the exhibit.

Which change to the configuration on Switch?
allows the two switches to establish an GtherChannel?

Change the protocol to EtherChannel mode on.

Change the LACP mode to active

Change the LACP mode to desirable

Change the protocol to PAqP and use auto mode

QUESTION 696
What is a function of a remote access VPN?

used cryptographic tunneling to protect the privacy of data for multiple users simultaneously

used exclusively when a user is connected to a company’s internal network

establishes a secure tunnel between two branch sites

allows the users to access company internal network resources through a secure tunnel

QUESTION 697
Drag and Drop Question
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right Select and Place:

Explanation:
This subnet question requires us to grasp how to subnet very well. To quickly find out the subnet range, we have to find out the increment and the network address of each subnet. Let’s take an example with the subnet
172.28.228.144/18:
From the /18 (= 1100 0000 in the 3rd octet), we find out the increment is 64. Therefore the network address of this subnet must be the greatest multiple of the increment but not greater than the value in the 3rd octet (228). We can find out the 3rd octet of the network address is 192 (because 192 = 64 * 3 and 192 < 228) -> The network address is 172.28.192.0. So the first usable host should be 172.28.192.1 and it matches with the 5th answer on the right. In this case we don’t need to calculate the broadcast address because we found the correct answer.
Let’s take another example with subnet 172.28.228.144/23 -> The increment is 2 (as /23 = 1111 1110 in 3rd octet) -> The 3rd octet of the network address is 228 (because 228 is the multiply of 2 and equal to the 3rd octet) -> The network address is 172.28.228.0 -> The first usable host is 172.28.228.1. It is not necessary but if we want to find out the broadcast address of this subnet, we can find out the next network address, which is 172.28.(228 + the increment number).0 or 172.28.230.0 then reduce 1 bit -> 172.28.229.255 is the broadcast address of our subnet. Therefore the last usable host is 172.28.229.254.

QUESTION 698

Refer to the exhibit. Drag and drop the learned prefixes from the left onto the preferred route methods from which they were learned on the right.

Explanation:

QUESTION 699
Drag and drop the characteristic from the left onto the IPv6 address type on the right.

QUESTION 700
Which type of wireless encryption is used for WPA2 in preshared key mode?

AES-128

TKIP with RC4

AES-256

RC4

Section: Security Fundamentals
Explanation:
We can see in this picture we have to type 64 hexadecimal characters (256 bit) for the WPA2 passphrase so we can deduce the encryption is AES-256, not AES-128.

Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2- config.html

QUESTION 701
Drag the IPv6 DNS record types from the left onto the description on the right.

Explanation:

https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20 (A%20Record,a%20hostname%20to%20another%20hostname.

QUESTION 702
Refer to the exhibit.

Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?

R2 is using the passive-interface default command

R1 has an incorrect network command for interface Gi1/0

R2 should have its network command in area 1

R1 interface Gil/0 has a larger MTU size

QUESTION 703
Which command can you enter to configure an IPv6 floating static route?

router(config)#ipv6 route FE80:0202::/32 serial 0/1 1

router (config)#ipv6 route ::/0 serial 0/1

router(config)#ipv6 route static resolve default

router(config)#ipv6 route FE80.0202::/32serial 0/1 201

QUESTION 704
Refer to the exhibit.

When router R1 is sending traffic to IP address 10.56.192 1, which interface or next hop address does it use to route the packet?

0.0.0.0.0/0

10.56.0.1

10.56.128.19

Vlan57

QUESTION 705
Refer to the exhibit. What is the next hop address for traffic that is destined to host 10.0.1.5?

10.0.1.3

10.0.1.50

10.0.1.4

Loopback D

QUESTION 706
What is an advantage of using SDN versus traditional networking when it comes to security?

SDN security is managed near the perimeter of the network with firewalls, VPNs, and IPS, and traditional networking security policies are created based on telemetry data.

SDN exposes an API to configure locally per device for security policies, and traditional networking uses northbound API for network admin interface for configuring security policies.

SDN creates a unified control point making security policies consistent across all devices, and traditional networking must be configured device by device, leaving room for error.

SDN devices communicate with each other to establish a security policy, and in traditional networking, devices communicate upstream to a central location to establish a security policy.

QUESTION 707
Which command is used to enable CHAP authentication whit PAP as the fallback method on a serial interface?

(config-if)#authentication ppp chap fallback ppp

(config-if)#authentication ppp chap pap

(config-if)#ppp authentication chap pap

(config-if)#ppp authentication chap fallback ppp

QUESTION 708
Drag and drop the DNS lookup components from the left onto the functions on the right.

Explanation:

QUESTION 709
Refer to the exhibit.

A Cisco engineer creates a new WLAN called lantest. Which two actions must be performed so that only high- speed 2.4-Ghz clients connect? (Choose two.)

Enable the Broadcast SSID option

Enable the Status option.

Set the Radio Policy option to 802 11g Only.

Set the Radio Policy option to 802.11a Only.

Set the Interface/Interface Group(G) to an interface other than guest

Loading …

Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity

The following will be discussed here:

Determine how a router makes a forwarding decision by default
Next hop
Interpret the components of routing table
Floating static
Administrative distance
Host route
Routing protocol code
Routing protocol metric
Gateway of last resort
Broadcast (DR/BDR selection)
Network mask
Longest match
IP Connectivity
Prefix
Configure and verify IPv4 and IPv6 static routing

Target Audience

According to Cisco, the new CCNA designation is well-suited to specific roles such as a network administrator and network support engineer. Some topics that are included in the certification exam would also suit CCNA technicians working alongside software developers in many organizations.

200-301 Certification All-in-One Exam Guide Dec-2025: https://www.prepawayexam.com/Cisco/braindumps.200-301.ete.file.html

Prepaway Exam Dumps

Tag: 200-301 Exam Cram

Read Online 200-301 Test Practice Test Questions Exam Dumps [Q692-Q709]

Cisco 200-301 Exam Certification Details:

Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity

Target Audience

Tag Archives: 200-301 Exam Cram

Cisco 200-301 Exam Certification Details:

Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity

Target Audience