A10-System-Administration valid exam pattern

[Jan 12, 2024] 100% Latest Most updated A10-System-Administration Questions and Answers

Try with 100% Real Exam Questions and Answers

To be eligible to take the A10-System-Administration Certification Exam, candidates must have a strong understanding of networking concepts, TCP/IP protocols, and network security. They should also have experience working with A10 Networks’ products and solutions, including the AX Series and Thunder Series ADCs, as well as the Thunder CGN and Thunder TPS security solutions.

NEW QUESTION 12
You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?

VRID Default is enough

NEW QUESTION 13
Which statement describes the effect this command:
erase preserve-management

The startup-config file is erased and the ACOS is immediately rebooted

All configuration profiles, SSL certificates, aFlex polices, black/white lists, and system logs are erased the next time the system reboots

The startup-config file is erased but the management interface ip configuration is kept

The start-up config file is erased but the all of the admin accounts are preserved

NEW QUESTION 14
What is the purpose of a VRRP-A floating-IP address?

To serve as a tie-breaker when selecting a VRRP-A owner.

To provide a single next hop IP address for uplink and downlink devices.

To use as source IP address for VRRP-A hellos.

To provide a single IP to manage all VRRP-A devices in the set.

NEW QUESTION 15
Select the statement that describes aXAPI authentication and authorization requirements:

aXAPI requires that users are assigned to the “aXAPI” role before they can execute a script.

aXAPI is subject to the same permissions requirements as the CLI and GUI.

aXAPI has special permissions that differ from CLI and GUI permissions.

aXAPI is subject to authorization but not authentication requirements.

NEW QUESTION 16
When VRRP-A is enabled on a device with multiple partitions, which statement about VRID 0 is correct?

Each partition has its own distinct VRID 0.

VRID 0 only exists in the shared partition; private partitions can only contain VRIDs numbered higher than 0.

VRID 0 is initially enabled only in the shared partition; partition administrators can enable VRID 0 in their partitions.

When using VRRP-A on a device with multiple partitions, VRID 0 is automatically disabled.

NEW QUESTION 17
When you execute a reboot command on the vMaster, how is aVCS Chassis affected?

Reboot is performed on vMaster and reload operation on vBlades.

All devices in the chassis are rebooted.

Reboot is performed on vMaster.

Reboot is performed only on vBlades.

NEW QUESTION 18
Which statement correctly describes the result of the following commands?
ACOS(config)#logging host 192.168.216.45
ACOs(config)#end
ACOS#active-partition p1
Currently active partition: p1
ACOS[p1](config)#logging host 2.2.2.2
ACOS[p1](config)#logging host partition shared

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.

System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

NEW QUESTION 19
How are aVCS changes that are performed on the vMaster pushed to the vBlades?

HA Sync needs to be done

VRRP-A should be failed over

Automatically

aVCS reload has to be performed

NEW QUESTION 20
What information is typically submitted with every aXAPI call after the initial login is complete?

Authorization header with signature

The ACOS device serial number

The programming language being used

The AXAPI special permission XML file

Log file location

NEW QUESTION 21
Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?

Device 2

Device 1

VCS will randomly assign the VRID to a device based on the uptime of the device.

Device 3

The VRID will be hosted on all three devices at the same time.

NEW QUESTION 22
Which statement describes the following configuration?
ACOS(config)# smtp 10.10.10.5
ACOS(config)# logging email emergency
ACOS(config)# logging email-address [email protected]

Send logs related to 10.10.10.5 to email address [email protected].

The ACOS device is configured to send log messages by email.

The ACOS administrator’s email is [email protected] where SNMP traps will be sent.

The ACOS device is configured to act as SMTP server to forward logging messages for other devices.

NEW QUESTION 23
ACOS can log the following accounting records for administrative sessions:

device access attempts only

syslog errors of a specified severity level

device access and command entry attempts

command entry attempts only

syslog errors of severity greater than a specified level

Loading …

New A10 Networks A10-System-Administration Dumps & Questions: https://www.prepawayexam.com/A10-Networks/braindumps.A10-System-Administration.ete.file.html

Prepaway Exam Dumps

Tag: A10-System-Administration valid exam pattern

[Jan 12, 2024] 100% Latest Most updated A10-System-Administration Questions and Answers [Q12-Q34]

Tag Archives: A10-System-Administration valid exam pattern