CT-TAE exam assessment – Prepaway Exam Dumps

CT-TAE Questions PDF [2024] Use Valid New dump to Clear Exam

Passing ISTQB CT-TAE Exam Using 2024 Practice Tests

ISTQB CT-TAE certification is a valuable credential for software testers who specialize in test automation. It is recognized globally and provides a standardized framework for evaluating the knowledge and skills of test automation professionals. Certified Tester Test Automation Engineer certification exam covers a wide range of topics and automation tools, making it relevant for both novice and experienced testers.

ISTQB CT-TAE certification program focuses on technical skills, software development, and testing methodologies. The program covers a wide range of topics, including software testing fundamentals, test automation frameworks, scripting and programming languages, and test management tools. Certified Tester Test Automation Engineer certification program is suitable for both beginners and experienced professionals, as it covers everything from the basics to advanced topics.

QUESTION 19
If model-based testing has been selected for the overall test automation approach for a project, how does that influence the layers of the TAA?

All layers are used, but the test generation layer will be automated based on the defined model

There will be no need for the execution layer

No adaptation will be needed because the interfaces will be defined by the model

There will be no need to design the tests for the API because those will be covered by the model

QUESTION 20
Which of the following statements does NOT describe good practice for maintaining the TAS?

The TAS must run in the development environment because development and programming knowledge are required for its maintainability

The TAS must be under configuration management, along with the test suite, the testware artefacts and the test environment in which it runs

The TAS must separate the test scripts from the environment in which it runs and from the associated harnesses and artefacts

The TAS must consist of components that can be easily replaced without affecting the overall behavior of the TAS itself

QUESTION 21
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?

Checking whether all the test cases contain the expected results

Checking whether the post condition have been fulfilled for all the test cases

Checking whether the loading of the TAS is repeatable in the SUT environment

Checking whether all the test cases produce repeatable outcomes

QUESTION 22
Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields ( e.g text boxes).
What is the BEST recommendation for improving the TAS?

Implementing keywords with higher level of granularity

Improving the architecture of the application in order to improve its testability

Adopting a set of standard verification methods for use by all automated tests

Implementing standard setup and teardown functions at test case level

QUESTION 23
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?

Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort

The introduction of a new feature could require updates or additions to the testware components

The test automation engineer should work with the business analysts to ensure the new feature is testable

It is generally more difficult to automate test cases for a new feature as the development has not yet started

QUESTION 24
Your organisation has successfully implemented a Test Automaton Solution (TAS) for a new project which has since been delivered into production via a number of sprints. A series of maintenance releases are now planned.
Some improvements were made to the Test Automation Architecture (TAA) as a result of feedback from the early sprints. The TAA improvements affected the TA, and the TAS was changed for the final sprint.
The new version of the TAS was generally well received but some performance and usability issues were encountered with the TAS which have yet to be addressed.
The test automation engineers supporting the maintenance releases must decide whether to use the enhanced TAS or the version that was used successfully for previous sprints.
What is the BEST action to take next?

Perform an analysis of risks versus benefits for the enhanced TAS and then decide which version to use.

Use the previous version because this was proven to work. It will be too risky to use the new version, with unresolved issues, for a live system.

Use the new version because, despite some issues, it works, and the live system should not be tested using a different TAS.

Use the new version of the TAS for the first maintenance release on a trial basis. If issues are encountered, switch to the previous version for later releases until the issues are resolved.

QUESTION 25
Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
The configuration of the TAS uses automated installation scripts
The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management

A and e

B and c

B and d

A and d

QUESTION 26
Which of the following statements about the reuse of TAS artefacts is TRUE?

Reusable TAS artefacts can include components (or parts of components) associated with different layers of the TAA

To enable reuse of TAS artefacts, a good design for reuse is built into the TAA and to further action are needed during the TAS lifecycle

Communications maintenance and improvements for reusing TAS artefacts are modify addressed during the design of the TAA

Reusable TAS artifacts associated with the definition layer of the TAA include the adaptors to the SUT components and/or interfaces

QUESTION 27
You are implementing test automation for a project and you want to be able to generate test cases automatically using a series of test design tools which use a variety of test design techniques such as decision tables, pairwise testing and boundary value analysis.
You also want to generate test data automatically which can then be used by the tests.
Initially these tests will be run manually to verify their correctness and ultimately you want to include them in the test execution tool so that they can run unattended.
Which layer of the gTAA will be used to support the specification of the test cases and preparation of the test data?

The generation layer

The definition layer

The execution layer

The adaptation layer

QUESTION 28
Which of the following statement about the implementation of automated regression testing is FALSE?

When automating regression tests, the structure of automated tests must always be the same as the corresponding manual tests

When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly

When automating regression tests, the initialization steps set the test preconditions should be automated wherever possible

When automating regression tests, consideration should be given to how much time would be saved by automation

QUESTION 29
You are working on a TAS for standalone application. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements include menus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?

Verify the testability support with the providers of the third party components

Verify whether the GUI identification depends on the browser.

Adopt an approach that uses the coordinates of the GUI elements instead

Verify whether naming standards for variables and have been defined for the current automation solution

QUESTION 30
Which of the following describes how a test execution report is likely to be used?

To understand which test step caused the failure in a test case

To identify problematic areas of the SUT by keeping a history showing which test cases fail the most

To measure coverage of the test basis by a test suite

To record how a test case failure has been fixed

QUESTION 31
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?

The ratio of comments to executable statements in the SUT code.

The SUT code coverage provided by the execution of the regression test suite.

The defect density in the automation code of the regression test suite.

The ratio of commands to executable statements in the automation code of the regression test suite

QUESTION 32
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?

The ability of the SUT to perform its intended function for a specified period of time

The ability to exercise the SUT by entering inputs, triggering events and invoking methods

The ability of the SUT to prevent unauthorized access to its components or data.

The ability to identify states, outputs, intermediate result and error messages in the SUT

QUESTION 33
Your TAS has been running successfully on a Windows/GUI based SUT for some years. The SUT has undergone minimal change over the years to maintain business as usual, deploying six-monthly releases for minor enhancements and bug fixes using a waterfall lifecycle.
The TAS has not changed at all during this period. The current project for the SUT will be using the Scrum methodology to deliver a more modern, competitive, user interface. It is in the release planning stage with an agreed release backlog and set of sprints outlined.
The move from lengthy waterfall releases to shorter sprints has led you to conduct a review of the current TAS to make sure it is robust and fully optimised for the timescale challenges of the new project.
What two steps would be BEST to undertake during the review?
a) Ensure that new automation code is using the same naming conventions as existing code.
b) Perform a full regression run in Sprint 1 to identify what improvements could be made to the TAS for future sprints.
c) Ensure that the TAS is using the latest libraries for the operating system.
d) Review the functions that act upon the controls for the GUI for possible consolidation.
e) Involve the test team to see what ease-of-use improvements they would like to see made to the TAS.

c and d

b and c

a and b

d and e

QUESTION 34
You are evaluating several test modelling tools and are wanting to automatically generate test cases within the tool where many different combinations of input data are created.
You are then wanting to export the test cases into a csv file which can then be read by a functional test execution tool using a data-driven or keyword-driven scripting method.
You have investigated several tools and there is only one tool that provides all the necessary features defined by your team with the exception of the export facility. It does not provide an export into either .xls or .csv formats.
What would be the BEST next step regarding the selection of this tool?

Consider another tool that is more “fit for purpose” and has all the features required.

Explore the possibility of creating your own export facility.

Ask the vendor and use forums to see if a solution is available or going to be available in the future.

Purchase this tool and generate the .csv file manually.

QUESTION 35
You are a TAE working for a software house which provides quarterly releases of its software to its customers. There are many different versions of the SUT that need to be tested simultaneously by different tests teams.
Your TAS is complex and you need to ensure it remains consistent across the different SUT environments. What is the BEST and MOST efficient way to ensure each of the test teams use the same version of the TAS to test the different versions of the SUT?

Due to the complexities involved and the high risks associated with these releases, it would be best to revert to manual testing.

Produce comprehensive documentation of the TAS, installation and usage guidelines and provide training for each team member.

Install the TAS is a central repository and have an automated installation and configuration of the TAS from this repository to each of the SUT environments.

Develop a tool to track historical test results across the different SUT environments and look for trends.

CT-TAE Study Guide Brilliant CT-TAE Exam Dumps PDF: https://www.prepawayexam.com/ISTQB/braindumps.CT-TAE.ete.file.html

Prepaway Exam Dumps

Tag: CT-TAE exam assessment

CT-TAE Questions PDF [2024] Use Valid New dump to Clear Exam [Q19-Q35]

Tag Archives: CT-TAE exam assessment