INSTC_V7 valid test cram – Prepaway Exam Dumps

100% Reliable Microsoft INSTC_V7 Exam Dumps Test Pdf Exam Material

Based on Official Syllabus Topics of Actual BICSI INSTC_V7 Exam

BICSI is a globally recognized professional association that provides information and communications technology (ICT) education, certification, and standards for professionals in the industry. BICSI Installer 2 – Copper is one of the certification exams offered by BICSI that is designed to test the knowledge and skills of individuals who specialize in copper-based cabling installation. INSTC_V7 exam is also known as the INSTC_V7 exam.

Q26. What is the primary purpose of the telecommunications bonding infrastructure?

Equalize potentials between metallic surfaces and equipment within entrance facilities

Improve the performance of the installed telecommunications equipment

Provide backup power to the telecommunications equipment when primary power to the equipment fails.

Q27. Which of the following is used to perform continuity and length tests for coaxial cable?

TDR (Time domain reflectometer) with an adapter

OLTS (optical loss test set)

VFL (visual fault locator)

OTDR (optical time domain reflectometer

Q28. Which of the following is the first step of the emergency rescue process?

Survey the scene

Contact 911

Notify someone

Secure the area

Q29. Which of the following should be used to prevent the cable from twisting during a horizontal backbone pull?

Cable brake

Innerduct

Swivel

Wire mess grip

Q30. Which topology uses a linear configuration that places all network devices on one length of cable?

Star

Ring

Bus

Q31. What is the maximum allowable horizontal cable length?

10 m (33 ‘)

30 m (100′)

50 m (164′)

90 m (295′)

Q32. Which is a keyed, contact, moderate loss connector in present use today that is pull & wiggle-proof?

Opti-Jack

SMA 906

Subscriber Connector (SC)

Straight Tip (ST)

Q33. Which of the following is the bonding connection point for telecommunications systems and equipment in the area by a telecommunication space?

SBB

RBB

BBC

TEBC

Q34. Which of the following is used to measure the length of a 4-pair cable?

Time domain reflectometer (TDR)

Pair scanner

Cable-end locator kit

Tone generator

Q35. A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?

Simplex

Half-duplex

Full-duplex

Q36. What is the specified performance level for Category 8 cable?

100 MHz

250 MHz

1000 MHz

2000 MHz

Q37. Which of the following connector styles is presently used within optical fiber cabling systems (i.e., it is NOT a legacy connector)?

Biconic

Small form factor (SFF)

Mechanical transfer RJ

SMA 906

Q38. Which of the Two organizations jointly oversee the worldwide standardization of telecommunications cabling?

Alliance for Telecommunications Industry Solutions (ATIS) and Society for Cable Telecommunications Engineers (SCTE)

National Electrical Contractors Association (NECA) and National Fire Protection Association (NFPA)

Comite Europeen de Normalisation Electrotechnique (CENELEC) and Electronic Industries Association (EIA)

International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC)

Q39. Which of the following is used to express system gain and loss?

Ohms

Henries

Farads

Decibel (dB)

Q40. Electrical power (P) is measured in ___________?

Ohms

Farads

henries

Watts

Q41. Light pulses in optical fiber cables are subjected to a loss in power as the light pulses travel along the optical fiber. Which of the following terms is used to describe this phenomenon?

Attenuation

Grounding

Crosstalk

Frequency

Q42. Which of the following PPE items MUST be worn at all times when you are working with or handling OF?

Fall Protection

Eye Protection

Hearing Protection

Breathing Protection

Q43. Which of the following is designed to provide protection from harmful chemicals?

Cut-resistant gloves

Rubber gloves

Leather gloves

Q44. How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?

6.3mm (0.25″)

12.7mm (0.5″)

25mm (1″)

38 mm (1.5″)

Q45. Which of the following may provide a demarcation point between the service provider and the customer premises cabling?

Telecommunications room

Work area

Telecommunications enclosure

Entrance facility

Q46. How long does it take someone to form a first impression?

10 to 15 seconds

1 to 2 minutes

5 to 10 minutes

30 minutes to 1 hour

Loading …

Free INSTC_V7 Dumps are Available for Instant Access: https://www.prepawayexam.com/BICSI/braindumps.INSTC_V7.ete.file.html

Prepaway Exam Dumps

Tag: INSTC_V7 valid test cram

100% Reliable INSTC_V7 Exam Dumps Test Pdf Exam Material [Q26-Q46]

Tag Archives: INSTC_V7 valid test cram