NO.167 A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

NO.168 Match the Networking Product Family to the appropriate use case:

NO.169 Indicate whether each management feature manages or monitors a single system or multiple systems.

NO.170 What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

NO.171 Place the components on the left in the correct order on the right for the recommended power-up sequence.

NO.172 A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?

NO.173 You are installing an HPE ProLiant server in a rack at a customer site. The customer’s facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.
Which ProLiant feature addresses the customer’s concern?

NO.174 Match each HPE solution to its corresponding technology usage.

NO.175 Match each characteristic to the appropriate RAID level.

NO.176 What is a primary benefit of DAS?

NO.177 A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

NO.178 Match the customer requirement to the appropriate HPE storage solution.

NO.179 You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

NO.180 What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

NO.181 A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks
Which HPE storage solution should be proposed?

NO.182 A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

NO.183 A customer requires a software-defined storage solution.
Which storage solution meets the customer’s needs?

NO.184 A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

NO.185 You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).
Which additional option is required?

NO.186 Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)

NO.187 A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.
Which HPE solution meets this customer’s requirements?

NO.188 A customer needs an HPE Nimble storage solution with 100TB capacity. They want to be able to add more disk capacity if needed
Which HPE tool can help you validate the proposed storage solution and that it is supported by HPE?

NO.189 Match the HPE Tool with its use case. Select all that apply.