NSE7_NST-7.2 valid exam materials – Prepaway Exam Dumps

Q13. Refer to the exhibit, which shows the output of a BGP debug command.

Which statement explains why the state of the 10.200.3.1 peer is Connect?

The local router initiated the BGP session to 10.200.3.1 but did not receive a response.

The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConf inn yet.

The router 10.200.3.1 has authentication configured for BGP and the local router does not.

The local router has a different AS number than the remote peer.

Q14. Exhibit.

Refer to the exhibit, which contains the partial output of the get vpn ipsec tunnel details command. Based on the output, which two statements are correct? (Choose two.)

Anti-replay is enabled.

The npu_flag for this tunnel is 03.

The npu_flag for this tunnel is 02

Different SPI values are a result of auto-negotiation being disabled for phase 2 selectors.

Q15. Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.

What two conclusions can you draw from the output? (Choose two.)

The name of the configured LDAP server is Lab.

The user is authenticating using CN=John Smith.

FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.

FortiOS is performing the second step (Search Request) in the LDAP authentication process.

Q16. Exhibit.

Refer to the exhibit, which shows the omitted output of diagnose npu np6 port-list on a FortiGate1500D.
An administrator is unable to analyze traffic flowing between port1 and port7 using the diagnose sniffer command.
Which two commands allow the administrator to view the traffic? (Choose two.)

Q17. Refer to the exhibit, which shows the output of diagnose syssessionstat. Which statement about the output shown in the exhibit is correct?

AII the sessions in the session table are TCP sessions.

162 sessions have been deleted because of memory page exhaustion.

There are 166 TCP sessions waiting to complete the three-way handshake.

There are two sessions that have not been removed in case of any out-of-order packets that arrive.

Q18. Referto the exhibit, which shows oneway communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.

What three actions must you take to ensure successful communication? (Choose three.)

Ensure the port for Neighbor Discovery has been changed.

FortiGate must not be in NAT mode.

Ensure TCP port 8013 is not blocked along the way

You must authorize the downstream FortiGate on the root FortiGate.

You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.

Q19. Refer to the exhibit,which shows the output of a diagnose command

What two conclusions can you draw from the output shown in the exhibit? (Choose two.)

This is an expected session created by the IPS engine.

Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.0.1.10.

Traffic in the original direction (coming from the IP address 10.171.121.38) will be routed to the next-hop IP address 10.200.1.1.

This is a pinhole session created to allow traffic for a protocol that requires additional sessions to operate through FortiGate.

Q20. Refer to the exhibit, which shows the omitted output of FortiOS kernel slabs.

Which statement is true?

The total slab size of the tcp_sessior. slab Is 7500 kB and is associated with the kernel.

The total slab size of the ip6_session slab is 1300 kB and is associated with the kernel.

The total slab size of the sctp_session slab is 0 kB and is associated with the user space

The total slab size of the ip_session slab is 3600 kB and is associated with the user space.

Q21. Which statement about IKE and IKE NAT-T is true?

IKE is used to encapsulate ESP traffic in some situations, and IKE NAT-T is used only when the local FortiGate is using NAT on the IPsec interface.

IKE is the standard implementation for IKEv1and IKE NAT-T is an extension added in IKEv2.

They each use their own IP protocol number.

They both use UDP as their transport protocol and the port number is configurable.

Q22. Which statement is correct regarding LDAP authentication using the regular bind type?

The regular bind type goes through four steps to successfully authenticate a user.

The regular bind type cannot be used if users are authenticated using sAMAccountName.

The regular bind type is the easiest bind type to configure on FortiOS.

The regular bind typerequires a FortiGate super_adminaccount.

Q23. Refer to the exhibit, which shows the omitted output of a real-time OSPF debug

Which statement is false?

A password has been configured on the local OSPF router but is not shown in the output

The Hello packet is being sent from an OSPF router with ID 0.0.0.112.

The two FortiGate devices attempting adjacency are in area 0.0.0.0.

One FortiGate device is configured to require authentication, while the other is not

Q24. Which two statements about conserve mode are true? (Choose two.)

FortiGate starts dropping all new sessions when the system memory reaches the configured red threshold.

FortiGate starts taking the configured action for new sessions requiring content inspection when the system memory reaches the configured red threshold.

FortiGate enters conserve mode when the system memory reaches the configured extreme threshold.

FortiGate exits conserve mode when the system memory goes below the configured green threshold

Q25. Which two statements about application-layer test commands ate true? (Choose two.)

Some of them display statistics and configuration information about a feature or process.

Some of them display real-time application debugs.

Some of them display only output, after you run the diagnose debug console enable command.

Some of them can be used to restart an application.

Q26.

Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude from the RTT value?

Its value represents the time it takes to receive a response after a rating request is sent to a particular server.

Its value is incremented with each packet lost.

It determines which FortiGuard server is used for license validation.

lts initial value is statically set to 10.

Q27. Exhibit.

Refer to the exhibit, which shows partial outputs from two routing debug commands.
Why is the port 2 default route not in the second command output?

The port2 interlace is disabled in the FortiGate configuration.

The port1 default route has a higher priority value than the default route using port2.

The port1default route has a lower priority value than the default route using port2.

The port1 default route has a lower distance than the default route using port2-

Q28. Which exchange lakes care of DoS protection in IKEv2?

IKE_Req_INIT

IKE_SA_INIT

IKE_Auth

Create_CHILD_SA

Prepaway Exam Dumps

Tag: NSE7_NST-7.2 valid exam materials

Latest [Dec 08, 2024] Realistic Verified NSE7_NST-7.2 Dumps [Q13-Q36]

Tag Archives: NSE7_NST-7.2 valid exam materials