Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing [Q41-Q57]

Rate this post

Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing

2V0-41.24 Dumps Real Exam Questions Test Engine Dumps Training

NEW QUESTION 41
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

Layer 2 bridge

Layer 2 broadcast domain

Layer 2 VPN

Layer 3 route

NEW QUESTION 42
Which three data collection sources are used by NSX Network Detection and Response to create correlations/Intrusion campaigns? (Choose three.)

Files and anti-malware (lie events from the NSX Edge nodes and the Security Analyzer

East-West anti-malware events from the ESXi hosts

Distributed Firewall flow data from the ESXi hosts

IDS/IPS events from the ESXi hosts and NSX Edge nodes

Suspicious Traffic Detection events from NSX Intelligence

NEW QUESTION 43
Which NSX feature can be leveraged to achieve consistent policy configuration and simplicity across sites?

VRF Lite

Ethernet VPN

NSX MTML5 UI

NSX Federation

NEW QUESTION 44
What are two supported host switch modes? (Choose two.)

Overlay Datapath

Secure Datapath

Standard Datapath

Enhanced Datapath

DPDK Datapath

NEW QUESTION 45
What are three NSX Manager roles? (Choose three.)

master

manager

controller

cloud

policy

zookeeper

NEW QUESTION 46
Which two of the following features are supported for the Standard NSX Application Platform Deployment? (Choose two.)

NSX Intrusion Detection and Prevention

NSX Intelligence

NSX Network Detection and Response

NSX Malware Prevention Metrics

NSX Intrinsic Security

NEW QUESTION 47
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

esxcli network diag ping -I vmk0O -H <destination IP address>

vmkping ++netstack=geneve -d -s 1572 <destination IP address>

esxcli network diag ping -H <destination IP address>

vmkping ++netstack=vxlan -d -s 1572 <destination IP address>

NEW QUESTION 48
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Tier-1 SR Router Port

Tier-0 Uplink interface

Downlink Interface for the Tier-0 DR

Downlink Interface for the Tier-1 DR

Inter-Tier interface on the Tier-0 gateway

NEW QUESTION 49
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

net-dvs

esxcfg-nics -l

esxcli network ip interface ipv4 get

esxcfg-vmknic -l

esxcli network nic list

NEW QUESTION 50
Which three security features are dependent on the NSX Application Platform? (Choose three.)

NSX Intelligence

NSX Firewall

NSX Network Detection and Response

NSX TLS Inspection

NSX Distributed IDS/IPS

NSX Malware Prevention

NEW QUESTION 51
When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)

Use an IP Pool

Use RADIUS

Use a Static IP List

Use BootP

Use a DHCP Server

NEW QUESTION 52
Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments?
(Choose two.)

Flow Monitoring

Traceflow

Live Flow

Packet Capture

Activity Monitoring

NEW QUESTION 53
Hotspot Question
Refer to the exhibit. An administrator configured NSX Advanced Load Balancer to load balance the production web server traffic, but the end users are unable to access the production website by using the VIP address.
Which of the following Tier-1 gateway route advertisement settings needs to be enabled to resolve the problem? Mark the correct answer by clicking on the image.

NEW QUESTION 54
Which two of the following will be used for Ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

Inter-Tier interface on the Tier-0 gateway

Tier-0 Uplink interface

Downlink Interface for the Tier-0 DR

Tier-1 SR Router Port

Downlink Interface for the Tier-1 DR

NEW QUESTION 55
A company Is deploying NSX micro-segmentation in their vSphere environment to secure a simple application composed of web. app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them to enforce security policies from NSX?

Use Edge as a firewall between tiers.

Do a service insertion to accomplish the task.

Group all by means of tags membership.

Create an Ethernet based security policy.

The answer is C. Group all by means of tags membership.
Tags are metadata that can be applied to physical servers, virtual machines, logical ports, and logical segments in NSX. Tags can be used for dynamic security group membership, which allows for granular and flexible enforcement of security policies based on various criteria1 In the scenario, the company is deploying NSX micro-segmentation to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
WKS-WEB-SRV-XXX
WKY-APP-SRR-XXX
WKI-DB-SRR-XXX
The optimal way to group them to enforce security policies from NSX is to use tags membership. For example, the company can create three tags: Web, App, and DB, and assign them to the corresponding VMs based on their names. Then, the company can create three security groups: Web-SG, App-SG, and DB-SG, and use the tags as the membership criteria. Finally, the company can create and apply security policies to the security groups based on the desired rules and actions2 Using tags membership has several advantages over the other options:
It is more scalable and dynamic than using Edge as a firewall between tiers. Edge firewall is a centralized solution that can create bottlenecks and performance issues when handling large amounts of traffic3 It is more simple and efficient than doing a service insertion to accomplish the task. Service insertion is a feature that allows for integrating third-party services with NSX, such as antivirus or intrusion prevention systems. Service insertion is not necessary for basic micro-segmentation and can introduce additional complexity and overhead.
It is more flexible and granular than creating an Ethernet based security policy. Ethernet based security policy is a type of policy that uses MAC addresses as the source or destination criteria. Ethernet based security policy is limited by the scope of layer 2 domains and does not support logical constructs such as segments or groups.
To learn more about tags membership and how to use it for micro-segmentation in NSX, you can refer to the following resources:
VMware NSX Documentation: Security Tag 1
VMware NSX Micro-segmentation Day 1: Chapter 4 – Security Policy Design 2 VMware NSX 4.x Professional: Security Groups VMware NSX 4.x Professional: Security Policies

NEW QUESTION 56
Which two statements are true about IDS Signatures? (Choose two.)

Users can upload their own IDS signature definitions.

An IDS signature contains data used to identify known exploits and vulnerabilities.

An IDS signature contains data used to identify the creator of known exploits and vulnerabilities.

IDS signatures can be High Risk, Suspicious, Low Risk and Trustworthy.

An IDS signature contains a set of instructions that determine which traffic is analyzed.

NEW QUESTION 57
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)

Thin Agent

RAPID

Security Hub

IDS/IPS

Security Analyzer

Reputation Service

VMware 2V0-41.24 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshoot and Optimize the VMware Solution: This section evaluates the skills of VMware Networking Professionals in troubleshooting and optimizing NSX solutions. Candidates will use log files to identify issues, including locating default log file locations and generating log bundles to assist in diagnostics.
Topic 2	Install, Configure, and Administrate the VMware Solution: This domain targets VMware System administrators and emphasizes preparing an NSX infrastructure for deployment. Candidates will learn to create transport zones and configure essential components necessary for a functional NSX environment.
Topic 3	VMware Solution: This section measures the skills of VMware NSX Networking professionals and covers knowledge of the VMware Virtual Cloud Network and NSX. Candidates will demonstrate an understanding of the NSX management cluster and the data plane, focusing on how these components interact to provide network virtualization.