Skip to content

Prepaway Exam Dumps

Best High Pass-Rate Exam Dumps

  • HOME
  • ALL EXAMS
  • Cisco
  • SAP
  • Huawei
  • Avaya
  • IBM
  • Amazon
  • Contact
  • HOME
  • ALL EXAMS
  • Cisco
  • SAP
  • Huawei
  • Avaya
  • IBM
  • Amazon
  • Contact

Tag Archives: 2V0-41.24 free practice test exam

  1.   »  
  2. Tag Archives: 2V0-41.24 free practice test exam

Tag: 2V0-41.24 free practice test exam

Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing [Q41-Q57]

Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing [Q41-Q57]

August 13, 2025 admin2V0-41.24, VMware2V0-41.24 100% accuracy, 2V0-41.24 free practice test exam, 2V0-41.24 test centres, 2V0-41.24 valid test cram, new composite test 2V0-41.24Leave a Comment on Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing [Q41-Q57]

Valid VCP-NV 2024 2V0-41.24 Dumps Ensure Your Passing

2V0-41.24 Dumps Real Exam Questions Test Engine Dumps Training

NEW QUESTION 41
An administrator has connected two virtual machines on the same overlay segment. Ping between both virtual machines is successful.
What type of network boundary does this represent?

 
 
 
 
When two virtual machines are connected on the same overlay segment, they are part of the same Layer 2 broadcast domain. In this case, the communication between the two VMs is happening within the same broadcast domain, which means that broadcast traffic can be sent to all devices on the segment. Since the ping is successful, the two VMs can communicate directly over Layer 2 without needing routing.

NEW QUESTION 42
Which three data collection sources are used by NSX Network Detection and Response to create correlations/Intrusion campaigns? (Choose three.)

 
 
 
 
 
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-14BBE50D-9931-4719-8FA7-884539C0D277.html

NEW QUESTION 43
Which NSX feature can be leveraged to achieve consistent policy configuration and simplicity across sites?

 
 
 
 
NSX Federation: This feature allows you to create and manage a global network infrastructure that spans across multiple sites using a single pane of glass. You can use this feature to synchronize policies, segments, gateways, firewalls, VPNs, load balancers, and other network services across sites.

NEW QUESTION 44
What are two supported host switch modes? (Choose two.)

 
 
 
 
 
Standard Datapath: This is the traditional mode used by the NSX host switch. It is typically used in environments where performance requirements are standard and no special acceleration techniques are needed.
Enhanced Datapath: This mode is designed to improve performance and provide better scalability, especially for environments with higher traffic loads or more demanding applications. It can provide better performance in certain scenarios by improving packet processing efficiency.

NEW QUESTION 45
What are three NSX Manager roles? (Choose three.)

 
 
 
 
 
 
master: The master role in NSX Manager is responsible for managing and coordinating the other NSX Manager nodes in the cluster.
policy: The policy role handles the policy-driven API and configuration, allowing administrators to define and manage network and security policies.
controller: The controller role in NSX Manager manages control plane functions and handles routing, switching, and other network state information required for NSX operations.

NEW QUESTION 46
Which two of the following features are supported for the Standard NSX Application Platform Deployment? (Choose two.)

 
 
 
 
 
NSX Network Detection and Response & probably Malware Prevention Metrics. NSX intelligence is only supported in Advanced.
https://docs.vmware.com/en/VMware-NSX/4.0/nsx-application-platform/GUID-85CD2728-8081-45CE-9A4A-D72F49779D6A.html

NEW QUESTION 47
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

 
 
 
 
The command vmkping ++netstack=geneve -d -s 1572 <destination IP address> is used to check the VMware kernel ports for tunnel end point communication. This command uses the geneve netstack, which is the default netstack for NSX-T. The -d option sets the DF (Don’t Fragment) bit in the IP header, which prevents the packet from being fragmented by intermediate routers. The -s
1572 option sets the packet size to 1572 bytes, which is the maximum payload size for a geneve encapsulated packet with an MTU of 1600 bytes. The <destination IP address> is the IP address of the remote ESXi host or VM.
Reference: : VMware NSX-T Data Center Installation Guide, page 19. : VMware Knowledge Base:
Testing MTU with the vmkping command (1003728). : VMware NSX-T Data Center Administration Guide, page 102.

NEW QUESTION 48
Which two of the following will be used for ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

 
 
 
 
 
In a Single Tier topology, the Edge node utilizes the following interfaces for ingress traffic:
Tier-0 Uplink Interface: This interface connects the Edge node to external networks, handling north-south traffic.
Downlink Interface for the Tier-0 Distributed Router (DR): This interface connects the Edge node to internal segments, managing east-west traffic between virtual machines.

NEW QUESTION 49
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)

 
 
 
 
 
The esxcli network ip interface ipv4 get command is used to display the IP address configuration of the VMkernel network interfaces, including those used for the Geneve protocol.
The esxcfg-vmknic -l command lists all VMkernel network interfaces, including their IP addresses, which can help identify the VMkernel port for the Geneve protocol.

NEW QUESTION 50
Which three security features are dependent on the NSX Application Platform? (Choose three.)

 
 
 
 
 
 
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/nsx-application-platform/GUID-
42EDE0AD-CD65-41AC-9694-AD0CCEC35969.html

NEW QUESTION 51
When deploying an NSX Edge Transport Node, what two valid IP address assignment options should be specified for the TEP IP addresses? (Choose two.)

 
 
 
 
 
IP Pool: This allows you to define a range of IP addresses within NSX that the TEPs can use.
DHCP Server: This enables the TEPs to automatically obtain IP addresses from a DHCP server configured in the network.

NEW QUESTION 52
Which two built-in VMware tools will help identify the cause of packet loss on VLAN Segments?
(Choose two.)

 
 
 
 
 
Traceflow: This tool helps in troubleshooting network issues by injecting synthetic packets into the network and observing their path. It allows administrators to trace the packet flow across various network segments, making it easier to identify points of packet loss.
Packet Capture: This tool enables detailed inspection of traffic by capturing packets at specific points in the network. It allows administrators to analyze packet headers and payloads to determine if packet loss is occurring and to identify possible causes.

NEW QUESTION 53
Hotspot Question
Refer to the exhibit. An administrator configured NSX Advanced Load Balancer to load balance the production web server traffic, but the end users are unable to access the production website by using the VIP address.
Which of the following Tier-1 gateway route advertisement settings needs to be enabled to resolve the problem? Mark the correct answer by clicking on the image.


Explanation:
The correct answer is to enable the option All LB VIP Routes on the Tier-1 gateway route advertisement settings. This option allows the Tier-1 gateway to advertise the NSX Advanced Load Balancer LB VIP routes to the Tier-0 gateway and other peer routers, so that the end users can reach the production website by using the VIP address.

NEW QUESTION 54
Which two of the following will be used for Ingress traffic on the Edge node supporting a Single Tier topology? (Choose two.)

 
 
 
 
 
The two interfaces that will be used for ingress traffic on the Edge node supporting a Single Tier topology are:
B) Tier-0 Uplink interface
C) Downlink Interface for the Tier-0 DR
The Tier-0 Uplink interface is the interface that connects the Tier-0 gateway to the external network. It is used to receive traffic from the physical router or switch that is the next hop for the Tier-0 gateway. The Tier-0 Uplink interface can be configured with a static IP address or use BGP to exchange routes with the external network.
The Downlink Interface for the Tier-0 DR is the interface that connects the Tier-0 gateway to the workload segments. It is used to receive traffic from the VMs or containers that are attached to the segments. The Downlink Interface for the Tier-0 DR is a logical interface (LIF) that is distributed across all transport nodes that host the segments. The Downlink Interface for the Tier-0 DR has an IP address that acts as the default gateway for the VMs or containers on the segments.

NEW QUESTION 55
A company Is deploying NSX micro-segmentation in their vSphere environment to secure a simple application composed of web. app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them to enforce security policies from NSX?

 
 
 
 
The answer is C. Group all by means of tags membership.
Tags are metadata that can be applied to physical servers, virtual machines, logical ports, and logical segments in NSX. Tags can be used for dynamic security group membership, which allows for granular and flexible enforcement of security policies based on various criteria1 In the scenario, the company is deploying NSX micro-segmentation to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
WKS-WEB-SRV-XXX
WKY-APP-SRR-XXX
WKI-DB-SRR-XXX
The optimal way to group them to enforce security policies from NSX is to use tags membership. For example, the company can create three tags: Web, App, and DB, and assign them to the corresponding VMs based on their names. Then, the company can create three security groups: Web-SG, App-SG, and DB-SG, and use the tags as the membership criteria. Finally, the company can create and apply security policies to the security groups based on the desired rules and actions2 Using tags membership has several advantages over the other options:
It is more scalable and dynamic than using Edge as a firewall between tiers. Edge firewall is a centralized solution that can create bottlenecks and performance issues when handling large amounts of traffic3 It is more simple and efficient than doing a service insertion to accomplish the task. Service insertion is a feature that allows for integrating third-party services with NSX, such as antivirus or intrusion prevention systems. Service insertion is not necessary for basic micro-segmentation and can introduce additional complexity and overhead.
It is more flexible and granular than creating an Ethernet based security policy. Ethernet based security policy is a type of policy that uses MAC addresses as the source or destination criteria. Ethernet based security policy is limited by the scope of layer 2 domains and does not support logical constructs such as segments or groups.
To learn more about tags membership and how to use it for micro-segmentation in NSX, you can refer to the following resources:
VMware NSX Documentation: Security Tag 1
VMware NSX Micro-segmentation Day 1: Chapter 4 – Security Policy Design 2 VMware NSX 4.x Professional: Security Groups VMware NSX 4.x Professional: Security Policies

NEW QUESTION 56
Which two statements are true about IDS Signatures? (Choose two.)

 
 
 
 
 
According to the Network Bachelor article1, an IDS signature contains data used to identify an attacker’s attempt to exploit a known vulnerability in both the operating system and applications. This implies that statement B is true. According to the VMware NSX Documentation2, IDS/IPS Profiles are used to group signatures, which can then be applied to select applications and traffic. This implies that statement E is true. Statement A is false because users cannot upload their own IDS signature definitions, they have to use the ones provided by VMware or Trustwave3. Statement C is false because an IDS signature does not contain data used to identify the creator of known exploits and vulnerabilities, only the exploits and vulnerabilities themselves. Statement D is false because IDS signatures are classified into one of the following severity categories: Critical, High, Medium, Low, or Informational1.
Reference: 3: Distributed IDS/IPS Settings and Signatures – VMware Docs 2: Distributed IDS/IPS – VMware Docs 1: NSX-T: Exploring Distributed IDS – Network Bachelor
https://docs.vmware.com/en/VMware-SD-WAN/5.4/VMware-SD-WAN-Administration-Guide/GUID-
0BB81F8D-70EB-42D4-ABAF-F80C8F77A4CB.html

NEW QUESTION 57
Which three NSX Edge components are used for North-South Malware Prevention? (Choose three.)

 
 
 
 
 
 
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-69DF70C2-1769-4858-97E7-B757CAED08F0.html#:~:text=On%20the%20north%2Dsouth%20traffic,Guest%20Introspection%20(GI)%20platform.
The main components on the edge node for north-south malware prevention perform the following functions:
* IDS/IPS engine: Extracts files and relays events and data to the security hub North-south malware prevention uses the file extraction features of the IDS/IPS engine that runs on NSX Edge for north-south traffic.
* Security hub: Collects file events, obtains verdicts for known files, sends files for local and cloud-based analysis, and sends information to the security analyzer
* RAPID: Provides local analysis of the file
* ASDS Cache: Caches reputation and verdicts of known files

Loading ... Loading …

Loading

VMware 2V0-41.24 Exam Syllabus Topics:

Topic Details
Topic 1
  • Troubleshoot and Optimize the VMware Solution: This section evaluates the skills of VMware Networking Professionals in troubleshooting and optimizing NSX solutions. Candidates will use log files to identify issues, including locating default log file locations and generating log bundles to assist in diagnostics.
Topic 2
  • Install, Configure, and Administrate the VMware Solution: This domain targets VMware System administrators and emphasizes preparing an NSX infrastructure for deployment. Candidates will learn to create transport zones and configure essential components necessary for a functional NSX environment.
Topic 3
  • VMware Solution: This section measures the skills of VMware NSX Networking professionals and covers knowledge of the VMware Virtual Cloud Network and NSX. Candidates will demonstrate an understanding of the NSX management cluster and the data plane, focusing on how these components interact to provide network virtualization.

 

VMware 2V0-41.24: Selling VCP-NV 2024 Products and Solutions: https://www.prepawayexam.com/VMware/braindumps.2V0-41.24.ete.file.html

Read More

Recent Posts

  • UPDATED [Oct 01, 2026] Pass Splunk Certified Cybersecurity Defense Analyst Exam with Latest Questions [Q46-Q60]
  • Pass Palo Alto Networks SecOps-Generalist Actual Free Exam Q&As Updated Dump Oct 01, 2026 [Q87-Q104]
  • [2026] Earn Quick And Easy Success With ESDP_2025 Dumps [Q55-Q76]
  • The Best AB-730 Exam Study Material and Preparation Test Question Dumps [Q29-Q49]
  • [Sep-2026] Latest Fitness NCSF-CPT Certification Practice Test Questions [Q14-Q34]

Archives

  • October 2026
  • September 2026
  • August 2026
  • July 2026
  • May 2026
  • April 2026
  • March 2026
  • February 2026
  • January 2026
  • December 2025
  • November 2025
  • October 2025
  • September 2025
  • August 2025
  • July 2025
  • April 2025
  • March 2025
  • February 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • June 2024
  • May 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • June 2023
  • May 2023
  • April 2023
  • March 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022

Categories

  • A10 Networks
  • AACE International
  • AAPC
  • ACAMS
  • Adobe
  • AHIMA
  • AICPA
  • Alibaba Cloud
  • Amazon
  • AMP
  • API
  • APICS
  • APM
  • APMG-International
  • Appian
  • Apple
  • ASIS
  • ASQ
  • ATLASSIAN
  • Automation Anywhere
  • Avaya
  • AVIXA
  • Axis
  • BCS
  • BICSI
  • Blue Prism
  • Broadcom
  • CAA Global
  • CFA
  • CheckPoint
  • CII
  • CIMA
  • CIPS
  • Cisco
  • Citrix
  • CIW
  • Cloud Security Alliance
  • Cloudera
  • CompTIA
  • Construction Specifications Institute
  • Copado
  • CrowdStrike
  • CSI
  • CWNP
  • CyberArk
  • DAMA
  • Databricks
  • EC-COUNCIL
  • ECCouncil
  • EMC
  • EPIC
  • Esri
  • EXIN
  • F5
  • Facebook
  • Fitness
  • Fortinet
  • GAQM
  • GARP
  • Genesys
  • GIAC
  • Google
  • Guidewire
  • H3C
  • Hitachi
  • HP
  • HRCI
  • Huawei
  • IAPP
  • IBM
  • IFSE Institute
  • IIA
  • IMA
  • Infor
  • IOFM
  • ISACA
  • ISC
  • ISQI
  • ISTQB
  • ITIL
  • Juniper
  • Linux Foundation
  • Lpi
  • Medical Tests
  • Microsoft
  • MongoDB
  • MSP-Foundation
  • NACE
  • NASM
  • National Payroll Institute
  • NCLEX
  • Network Appliance
  • Nokia
  • Nursing
  • Nutanix
  • NVIDIA
  • Okta
  • OMSB
  • Oracle
  • Palo Alto Networks
  • PCI
  • PECB
  • Pegasystems
  • PMI
  • PRINCE2
  • Proofpoint
  • Psychiatric Rehabilitation Association
  • Python Institute
  • Qlik
  • RCEM
  • RedHat
  • RUCKUS
  • Salesforce
  • SAP
  • SASInstitute
  • Scrum
  • ServiceNow
  • SHRM
  • Sitecore
  • Slack
  • Snowflake
  • SolarWinds
  • Splunk
  • Supermicro
  • Symantec
  • Tableau
  • The Institutes
  • The Open Group
  • UiPath
  • Uncategorized
  • USGBC
  • Veeam
  • VMware
  • WGU

Recent Comments

    Copyright © 2022 Prepaway Exam Dumps. DMCA Privacy Policy Contact US